PRESENTATION REMOTE CONTROL
MODEL POA-RCKIT02
Operating Instruction
Federal Communication Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
Tested To Comply
With FCC Standards
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
FOR HOME OR OFFICE USE
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures :
–
–
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions.
If such changes or modifications should be made, you could be required to stop operation of the equipment.
Model Number
Trade Name
: POA-RCKIT02
: Sanyo
Responsible party
: SANYO FISHER COMPANY
Address
: 21605 Plummer Street, Chatsworth, California 91311
: (818)998-7322
Telephone No.
The CE Mark is a Directive conformity
mark of the European Community (EC).
Voor de klanten in Nederland
Bij dit product zijn batterijen geleverd.
Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA.
Name and Function of Each Button
Presentation Remote Control performs the function of a wireless mouse to control the mouse cursor on the computer. For
convenience while giving presentations, some buttons controlling the projector are also provided.
For computer
Aim the remote control at the Presentation Remote receiver.
q PAGE ▲▼ buttons
r
e
Scroll back and forth pages on the screen when giving presentations.
w Cursor button
Act as the cursor on a computer mouse.
L-CLICK
R-CLICK
e R-CLICK button
Act as the right button on a computer mouse.
PAGE
r L-CLICK button
q
w
Act as the left button on a computer mouse.
To drag a selected item, press and hold the L-CLICK button and move
the cursor with the Cursor button.
For projector
Aim the remote control at the IR receiver of the projector.
t FREEZE button
o
i
Freeze the picture.
t
y
-
TIMER
FREEZE NO SHOW
COMPUTER VIDEO
P
y COMPUTER button
u
Select COMPUTER input source.
u VIDEO button
CXPW
Select VIDEO input source.
i P-TIMER button
Operate the P-timer function.
o NO SHOW button
Temporarily turn off the image on the screen.
Note : For detailed operation, refer to the projector owner's manual.
Specifications
Remote Control Unit
Power Source
AAA, SUM-04 or LR03 type x 2
Operating Range
Dimensions
16.4’ (5m) / 30˚
2.0”(W) x 0.91”(H) x 4.8”(D) (51.5mm x 23.2mm x 123mm)
2.54 oz (72 g) (including batteries)
Net Weight
Remote Control Receiver
Transmission Signals
Infrared
Windows
• Windows 98 / 2000/ Me / XP
✽ Compatible with only full versions of Windows. (Upgraded version cannot be used.)
Macintosh
Compatible Computers
• Mac OS 9.1 or later.
Connector
USB Type B
1.6oz (45g)
3.3" (1m)
Net Weight
Cable Length
3
|