Samsung CRT Television CL29K40PQ, CL29K40MQ, CL29M40MQ User Guide

Connection Panel_{(depending on the model)}

COLOR TELEVISION

CL29K40PQ/CL29K40MQ/CL29M40MQ

The product color and shape may vary depending on

➢

the model.

Rear Jack

Side Jack

Owner’s Instructions

Before operating, please read this manual thoroughly,

and retain it for future reference.

www.samsung.com/global/register

Control Panel_{(depending on the model)}

Whenever you connect an audio or video system to your

TV, ensure that all elements are switched off. Please be

sure to match the color coded input terminals and cable

jacks.

Please be sure to match the color coded input terminals

and cable jacks.

When both the side and rear jacks (AV IN 2) are

connected to external equipment, the side receives

priority.

➢

The product color and shape may vary depending on

the model.

➢

Front Panel

Œ Audio/Video Output Jacks

Œ S-Video Input Jack

Connect to the audio/video input jacks of a recording VCR.

Connect an S-Video signal from a camcorder or video game.

´ Audio/Video Input Jacks

´ Video Input Jack

Connect to the audio/video output jacks of VCRs, DVD

players and similar devices.

Connect a video signal from a camcorder or video game.

ˇ Component Video Input Jacks (Y, PB, PR)

ˇ Audio Input Jacks

Œ On-screen menu display

´ Volume adjustment

¨ Channel selection

¨ Remote control sensor

ˆ Indicator (Standby or Timer)

Ø Power on/off

Connect to the Component video outputs of a DVD or DTV

set-top box. 480i video signal input is available.

When using the Component Video input, connect audio jacks

to “AV IN 2 (AUDIO-L/R)”.

Connect audio signals from a camcorder or video game.

¨ VHF/UHF

Connect to an antenna or to a cable TV system.

◆ The ´ and ˇ buttons also have the same function as the

œ/√/†/… buttons on the remote control.

◆ If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the

TV.

AA68-03858A-03

English - 1

After all available

Setup - Plug & Play

Input -

Source List / Edit Name

(depending on the model)

Plug & Play

channels are stored, the

“Clock Set” is displayed.

Press the œ or √ button

to move to the hour or

minute. Set the clock by

pressing the ▲ or ▼ button.

Clock Set

Move

-- : -- am

When the TV is initially powered on, several basic

customer settings proceed automatically and

subsequently.

Enter

Skip

Source List

◆ Source List

The following settings are available.

AV1

AV2

S-Video

Component

You can switch between

viewing signal from

connected equipment,

such as a VCR, DVD,

----

Press the POWER

button on the remote

control.

Plug & Play

When you have

Start Plug & Play

finished, press the

MENU button. The

“Enjoy your watching.”

is displayed.

Move

Enter

Return

set-top box, and the TV

source (broadcast or

cable).

The “Start Plug & Play”

is displayed. Press the

ENTER button, then the

“Language” is displayed.

Enjoy your watching.

Enter

Exit

Press the SOURCE button on the remote

control repeatedly to select the desired signal

source.

➢

Plug & Play feature

doesn’t work in the AV mode.

➢

Press the … or † button

to select the desired

language, then press the

ENTER button. The

“Check antenna input.” is

displayed.

Plug & Play

Language

◆ Edit Name

Setup

Re-setting the Plug &

Play

Method: MENU ➜ …/†

(Setup) ➜ ENTER ➜ …/†

(Plug & Play) ➜ ENTER

You can give a name to

the external source.

Edit Name

English

Plug & Play

Language

Time

√

Español

Português

Français

: English

AV1

AV2

S-Video

Component

----

: ----

VCR: ----

DVD: ----

Caption

Child Lock

Blue Screen

Melody

Cabl:e S

: Off

: On

Move

Enter

Skip

Sat. STB

AV Receiver

DVD Receiver

†

Demonstration

Move Enter

Return

Move

Enter

Return

Make sure that the

antenna is connected to

the TV. Press the

ENTER button, then the

“Auto Program” is

displayed.

Plug & Play

Check antenna input.

Enter

Skip

Press the ENTER button

to start. The TV begins

memorizing all available

channels. Press the

Plug & Play

Auto Program

Air 3

Stop

ENTER button to stop.

Enter

Skip

English - 3

Channel - Memorizing the Channels

Channel - FineTune

Setup -Time

Time

◆ Clock

Your TV can memorize and store all of the available

channels for both “off-air” (antenna) and cable

channels. After the available channels are memorized,

The Fine Tuning function lets

you manually adjust the TV’s

tuner if you have difficulty

tuning channels.

Clock

-- am

Fine Tune

Reset

Setting the clock is

Sleep Timer

On Timer

Off Timer

On Timer Channel

On Timer Volume

: Off

√

-- am Off

3 ✽

necessary in order to use

the various timer features

of the TV. Also, you can

check the time while

watching the TV. (Just

press the INFO button.)

use the CH and CH

channels.

buttons to scan through the

Move

Adjust

Adjust the fine tuning by

pressing the œ or √ button.

Return

Move

Enter

Return

This eliminates the need to change channels by

entering the channel digits. There are three steps for

memorizing channels: “Air/Cable”, “Auto Program”

and “Add/Delete”.

To store the fine tuning setting in the TV’s memory,

press the MENU button.

◆ Sleep Timer

To reset the fine tuning to “0”, select ”Reset” by

pressing the ▲ or ▼ button, then press the ENTER

button.

You can select a time period of between 30 and

180 minutes after which the TV automatically

switches to standby mode.

◆ Air/Cable

Before your TV can begin

memorizing the available

channels, you must

specify the type of signal

source that is connected

to the TV (i.e., an

Channel

Air/Cable

Auto Program

Add/Delete

Fine Tune

Name

:Air

Air

Cable

Press the SLEEP button on the remote

control repeatedly until the appropriate time

interval appears (any of the preset values

from “30 Min.” to “180 Min.”).

➢

LNA

: Off

Channel - Name

Move

Enter

Return

Use this feature to assign an

easy-to-remember label to

any channel (i.e., “CBS”,

“ESPN”, “PBS2”, “CNN1”,

etc.). A label consists of four

fields, where each field is a

letter (A~Z), a number (0~9),

Name

antenna or a cable

system).

◆ On Timer / Off Timer

… More

You can set the On/Off timers so that the TV will

switch on or off automatically at the time you

select.

- - - -

Select “Air” or “Cable” by pressing the … or †

button.

† More

You must set the clock first.

➢

Move

Adjust

Return

◆ Auto Program

◆ On Timer Channel

All available channels are

-, or a blank. When the INFO button is pressed, the

channel label will appear next to the channel number.

The preferred channel can be set for when the

timer automatically turns on the TV.

automatically stored in

memory when channels

Air 3

are selected by the direct

tuning function.

Stop

◆ On Timer Volume

Enter

Return

The preferred volume can be set for when the

timer automatically turns on the TV.

Press the ENTER button

at any time to interrupt

the memorization process.

Channel - LNA _{(depending on the model)}

When a weak broadcast

signal causes an unclear,

noisy picture, the “LNA”

feature improves the picture

quality by setting to “On”. If

you experience noise on a

certain channel, set the

Channel

Auto Power Off

☛

Air/Cable

Auto Program

Add/Delete

Fine Tune

Name

: Air

When you set the timer “On”, the TV will

eventually turn off, if no controls are operated for

3 hours after the TV was turned on by timer. This

function is only available in timer “On” mode and

prevents overheating or leakages, which may

occur if a TV is on for too long.

◆ Add/Delete

You can add or delete a

channel to display the

channels you want only.

To use the Add/Delete

function, first run Auto

Program.

Add/Delete

Off

LNA

: Off

… More

: DDeelleetteedd

: DAedldeetedd

: Deleted

Move

Enter

Return

† More

“LNA” to “On” or “Off” for this channel, to obtain the

optimum picture.

Move

Enter

Return

Select “Deleted” or

“Added” by pressing the

… or † button.

English - 4

Setup - Caption

Setup - Child Lock _{(depending on the model)}

Setup -

Language / Blue Screen /

Melody / Demonstration

Caption

Child Lock

Your TV decodes and

This feature allows you to

prevent unauthorized users,

such as children, from

Caption

Mode

Channel

Field

: On

Child Lock

Channel

Lock

: On

: 11

: ?

displays the closed captions

that are broadcast with

certain TV shows. These

captions are usually subtitles

for the hearing impaired or

foreign-language

translations. All VCRs record the closed caption signal

from TV programs, so home-recorded video tapes

also provide closed captions. Most pre-recorded

commercial video tapes provide closed captions as

well. Check for the closed caption symbol in your TV

: Caption

: 1

Setup

◆ Language

watching unsuitable

Plug & Play

Language

Time

√

When you start using the

TV for the first time, you

must select the language

which will be used for

displaying menus and

indications.

: English

programs by muting out

video and audio. Child Lock

cannot be released using

Move

Enter

Return

Move

Enter

Return

Caption

Child Lock

Blue Screen

Melody

: Off

: On

Demonstration

front panel buttons. Only remote control can release

the Child Lock setting, so keep the remote control

away from children.

Move Enter

Return

◆ Blue Screen

◆ Child Lock: On/Off

If no signal is being received or the signal is very

weak, a blue screen automatically replaces the

noisy picture background. If you wish to continue

viewing the poor picture, you must set the “Blue

Screen” to “Off”.

schedule and on the tape’s packaging:

You can activate or deactivate the Child Lock

function.

◆ Caption: On/Off

You can activate or deactivate the Caption

function.

◆ Channel: Channel number to be locked.

Press the CAPTION button on the remote

control repeatedly to select “On” or “Off”.

◆ Lock: When press the ENTER button, the

➢

◆ Melody

“Locked” is displayed.

You can hear melody sound when the TV is

powered on or off.

◆ Mode

If any channel is locked, you can not access to

the “Channel” and “Child Lock” menu by using

the control buttons on the TV panel (the “Not

Available” is displayed in the “Child Lock” menu).

You can access by using the remote control only.

➢

In “Caption” mode, captions appear at the

◆ Demonstration

bottom of the screen, and they usually cover

only a small portion of the picture.

In “Text” mode, information unrelated to the

program, such as news or weather, is

displayed. Text often covers a large portion of

the screen.

To become familiar with the various menus

provided by the TV, you can view the in built

demonstration.

Each of the menu options is displayed in turn.

When you wish to stop the demonstration, press

any button on the remote control.

◆ Channel / Field

Depending on the particular broadcast, it might be

necessary to make changes to “Channel” and

“Field”.

Different channels and fields display different

information: Field 2 carries additional information

that supplements the information in Field 1.

(For example, Channel 1 may have subtitles in

English, while Channel 2 has subtitles in Spanish.)

Misspellings and unusual characters sometimes

occur during closed caption transmissions,

especially those of live events. There may be a

small delay before captions appear when you

change channels. These are not malfunctions of

the TV.

☛

English - 5

◆ Color Tone: Cool2/Cool1/Normal/Warm1/Warm2

You can change the color of the entire screen

according to your preference.

R.Surf Feature

Picture - PIP _{(depending on the model)}

This feature allows you to

set the TV to return to a

particular channel after a

certain amount of time. For

example, you may be

watching a channel when

commercials start. You can

set the R.Surf to “5 minutes”, then switch channels.

After minutes, the TV will return to the original

channel.

You can display a sub picture within the main picture

of TV program or external A/V devices such as VCR

or DVD.

In this way you can watch TV program or monitor the

video input from any connected devices while

watching TV or other video input.

◆ Reset

The previously adjusted picture settings will be

reset to the factory defaults.

Surf

00: 29

◆ Size: Normal/Zoom

You can select the picture size which best

corresponds to your viewing requirements.

PIP

◆ PIP: On/Off (Œ)

PIP

Source

Swap

Size

Position

Channel

: On

: AV1

√

You can activate or

deactivate the PIP

function.

Press the P.SIZE button on the remote control

to change the picture size.

➢

: Large

: 3

Press the R.SURF button repeatedly to set the timer

in thirty second intervals, up to five minutes.

If the PIP is activated

(On) when the

➢

◆ Digital NR

Move

Enter

Return

If the signal received by the TV is weak, you can

activate this feature to reduce any static and

ghosting that may appear on the screen.

picture size is set to

“Zoom” mode, the picture size is automatically

converted into “Normal” mode. However, you

can select “Zoom” after activating the PIP.

You can hear only the sound of the main

picture while the PIP is activated.

The PIP function is not available in

“Component” mode.

Picture -

◆ DNIe Jr (Digital Natural Image engine Junior)

(depending on the model)

Mode / Custom /

ColorTone / Size /

Digital NR / DNIe Jr / Tilt

➢

This feature bring you more detailed image with

detail enhancement, contrast enhancement and

white enhancement. New image compensation

algorithm gives brighter, clearer, much detailed

image to you.

DNIe Jr technology will fit every signals into your

eyes.

Picture

◆ Mode:

◆ Source

You can select a source of the sub-picture.

Mode

Size

Digital NR

DNIe Jr

Tilt

: Dynamic

: Normal

: Off

: On

: 0

√

Dynamic/Standard

Movie/Custom

You can select the type of

picture which best

corresponds to your

viewing requirements.

PIP

√

◆ Swap (´)

You can interchange the main picture and the sub-

picture.

Move

Enter

Return

◆ Tilt (depending on the model)

If you find that the picture received is slightly tilted

to one side, you can adjust the tilt setting.

Mode

Press the P.MODE

Mode

: Dynamic

√

➢

◆ Size: Small/Large

Contrast

Brightness

Sharpness

Color

100

button on the remote

control to select one

of the standard

You can select a size of the sub-picture.

Tint

: G 50 R 50

: Cool1

Color Tone

Reset

√

◆ Position:

√

picture settings.

Move

Enter

Return

You can select a position of the sub-picture.

◆ Contrast/Brightness/

◆ Channel (ˇ)

Sharpness/Color/Tint

You can select a channel of the sub-picture only

when the “Source” is set to “TV”.

The TV has several settings which allow you to

control the picture quality.

Easy functions of the

remote control

English - 6

◆ Turbo Plus

Your remote control does not operate your TV.

◆ Make sure the remote has batteries.

◆ Check that the “+” and “-” ends of the batteries

are inserted correctly.

Sound -

This feature emphasizes the bass and treble

frequencies to add fullness to the sound.

Mode / Equalizer / MTS

Auto Volume / Pseudo Stereo /

Turbo Plus

Press the TURBO button on the remote

control repeatedly to select “On” or “Off”.

➢

◆ Check that the batteries are drained.

The TV won’t turn on.

Sound

◆ Mode: Standard/Music/

◆ Make sure the wall outlet is working.

◆ Make sure the TV is plugged in.

◆ Make sure the remote has batteries.

Mode

Equalizer

MTS

Auto Volume

Pseudo Stereo

Turbo Plus

: Custom

√

Movie/Speech/Custom

Troubleshooting

: Stereo

: Off

You can select the type of

special sound effect to be

: Off

If the TV seems to have a problem, first try this list of

possible problems and solutions. If none of these

troubleshooting tips apply, then call your nearest

Samsung authorized service center.

used when watching a

Remote control malfunctions

given broadcast.

Move

Enter

Return

◆ Replace the remote control batteries.

◆ Clean the upper edge of the remote control

(transmission window).

Press the S.MODE

➢

button on the remote control to select one of

the standard sound settings.

Poor picture.

◆ Check that the “+” and “-” ends of the batteries

are inserted correctly.

◆ Check that the batteries are drained.

◆ Try another channel.

◆ Adjust the antenna.

◆ Check all wire connections.

◆ Equalizer

The TV has several settings which allow you to

control the sound quality.

If you make any changes to these settings,

the sound mode is automatically switched to

“Custom”.

➢

Poor sound quality.

◆ Try another channel.

◆ Adjust the antenna.

◆ MTS (Multi-channel Television Sound)

Depending on the particular program being

broadcast, you can listen to Mono, Stereo, or SAP.

No picture or sound.

◆ Try another channel.

◆ Press the TV/VIDEO button.

◆ Make sure the TV is plugged in.

◆ Check the antenna connections.

◆ Make sure the MUTE button is off.

Press the MTS button on the remote control

repeatedly to select “Stereo”, “Mono”, or

“SAP” (Secondary Audio Program).

➢

◆ Auto Volume

No color, wrong colors or tints.

◆ Make sure the program is broadcast in color.

◆ Adjust the picture settings.

Each broadcasting station has its own signal

conditions, and so it is not easy to adjust the

volume every time the channel is changed. This

feature lets you automatically adjust the volume of

the desired channel by lowering the sound output

when the modulation signal is high or by raising

the sound output when the modulation signal is

low.

Picture rolls vertically.

◆ Adjust the antenna.

◆ Check all wire connections.

◆ If you are using a VCR, check the tracking.

The TV operates erratically.

◆ Unplug the TV for 30 seconds, then try operating

it again.

◆ Pseudo Stereo

This feature converts a monaural sound signal into

two identical left and right channels. Once the

“Pseudo Stereo” is set to “On” or “Off”, the setting

applies to the sound effects such as “Standard”,

“Music”, “Movie” and “Speech”.

English - 7

OSD Map

Important Warranty Information

RegardingTelevision Format Viewing

✽ : It is variable depending on the model.

Input

Source List

✽

Edit Name

VCR / DVD / Cable STB / Sat. STB / AV Receiver / DVD Receiver / Game /

Camcorder / DVD Combo

Standard screen format televisions (4:3, the aspect

ratio of the screen width to height) are primarily

designed to view standard format full-motion video.

The images displayed on them should primarily be in

the standard 4:3 ratio format and constantly moving.

Displaying stationary graphics and images on screen,

such as the dark top and bottom letterbox bars (wide

screen pictures), should be limited to no more than

15% of the total television viewing per week.

Picture

Mode

Dynamic / Standard / Movie / Custom

Contrast / Brightness / Sharpness / Color / Tint

Color Tone

Reset

Cool2 / Cool1 / Normal / Warm1 / Warm2

Size

Digital NR

Off / On

DNIe Jr

✽

Tilt

PIP

✽

PIP

Off / On

Wide screen format televisions (16:9, the aspect ratio

of the screen width to height) are primarily designed

to view wide screen format full-motion video. The

images displayed on them should primarily be in the

wide screen 16:9 ratio format, or expanded to fill the

screen if your model offers this feature, and constantly

moving. Displaying stationary graphics and images on

screen, such as the dark side-bars on non-expanded

standard format television video and programming,

should be limited to no more than 15% of the total

television viewing per week.

Source

Swap

Size

✽

Position

Channel

Sound

Channel

Setup

Mode

Equalizer

MTS

Auto Volume

Pseudo Stereo

Turbo Plus

Standard / Music / Movie / Speech / Custom

Mono / Stereo / SAP

Off / On

Additionally, viewing other stationary images and text

such as stock market reports, video game displays,

station logos, web sites or computer graphics and

patterns, should be limited as described above for all

televisions. Displaying any stationary images that

exceed the above guidelines can cause uneven

aging of picture tubes (CRTs) that leave subtle,

but permanent burned-in ghost images in the

television picture. To avoid this, vary the

programming and images, and primarily display

full screen moving images, not stationary

patterns or dark bars. On television models that

offer picture sizing features, use these controls to

view the different formats as a full screen picture.

Air/Cable

Auto Program

Add/Delete

Fine Tune

Name

Air / Cable

Added / Deleted

LNA

✽

Off / On

Plug & Play

Language

Time

English / Español / Português / Français

Clock

Sleep Timer

On Timer

Off Timer

On Timer Channel

On Timer Volume

Caption

Mode

Channel

Field

Child Lock

Channel

Lock

Caption

Off / On

Caption / Text

1 / 2

Be careful in the selection and duration of television

formats used for viewing. Uneven CRT aging as a

result of format selection and use, as well as other

burned-in images, is not covered by your Samsung

limited warranty.

1 / 2

Child Lock

✽

Off / On

Blue Screen

Melody

Demonstration

Off / On

English - 8

PYLE Audio Speaker PSS4 User Guide
Quantum Mobility Aid Access Ramp User Guide
Raymarine GPS Receiver ST4000+ User Guide
Ricoh Photo Printer MP C4000 User Guide
Russound Speaker SP5502 User Guide
Ryobi Cordless Drill CDI 1803M User Guide
Ryobi Grinder BGH615 User Guide
Ryobi Trimmer 704r User Guide
Samsung Cell Phone 07202010 User Guide
Satco Products Indoor Furnishings HID Lamps User Guide