OWNER’S INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’UTILISATION
MANUAL DE INSTRUÇÕES
ISTRUZIONI PER L’USO
AW127JE/B
AW126JE/B
AW147JB
AW146JB
AW12A6(A7)JD
AW12A6(A7)JA
WC12ZR
Window-type Room Air Conditioner ( Cool )
Acondicionador de aire doméstico sistema de tipo ventana ( Refrigeración )
Climatiseur de type Fenêtre ( Refroidissement )
O ar Condicionado de Window-Type ( Refrigeração )
Condizionatore d’aria per ambienti da finestra ( Raffreddamento )
E
S
F
P
I
DB68-30875B(3)
Contents
◆ PREPARING YOUR AIR CONDITIONER
◆
◆
◆
◆
◆
Safety Precautions .........................................................................................
Air Conditioning Unit - Main Parts, Buttons and Display ................................
Remote Control Buttons .................................................................................
Getting Started ...............................................................................................
Inserting the Remote Control Batteries ..........................................................
2
4
5
6
7
◆ OPERATING YOUR AIR CONDITIONER
◆
◆
◆
◆
Cooling Your Room .........................................................................................
Airing Your Room ............................................................................................
Adjusting the Air Flow Direction Horizontally ................................................. 10
Adjusting the Air Flow Direction Vertically ...................................................... 10
8
9
◆ PROGRAMMING YOUR AIR CONDITIONER
◆
Switching the Unit Off Automatically (Off Timer) ............................................ 11
Cancelling the Off Timer ................................................................................. 11
◆
◆ RECOMMENDATIONS FOR USE
◆
◆
◆
◆
◆
◆
Operating Recommendation ........................................................................... 12
Temperature and Humidity Ranges ................................................................ 12
Cleaning Your Air Conditioner ......................................................................... 13
Solving Common Problems ............................................................................ 14
Installing a Filter ............................................................................................. 15
Technical Specifications ................................................................................. 15
◆ METHOD OF INSTALLATION ..................................................................................... 16
E-3
Air Conditioning Unit - Main Parts, Buttons and Display
◆ The design and shape are subject to
change according to the model.
Inner air flow blades
(right/left orientation)
Air outlet
Outer air flow blades
(up/down orientation)
Air inlet (Outside)
Ventilation lever
Air inlet (inside)
Air filter
(The air filter is located inside)
Power plug
◆◆The type of power plug
may differ, depending
on the local power supply.
◆◆The power plug may be
not supplied depending
on the model.
Temperature/timer setting
Remote control sensor
Temperature indicator
Timer indicator
Operating mode indicators
(COOL, FAN)
ON/OFF & Operating mode
selection button
E-4
Remote Control - Buttons
Timer setting buttons
Operating mode selection
buttons (FAN, COOL)
Temperature adjustment
buttons
ON/OFF Button
Fan speed adjustment
buttons
Air flow blade swing button
E-5
Getting Started
You have just purchased a w indow -type room air conditioner and it has been installed by your
installation specialist.
Your Ow ner’s Instructions contain m uch valuable inform ation on using your air conditioner.
Please take the tim e to read them as they w ill help you take full advantage of the unit’s features.
The booklet is organized as follow s.
◆ The follow ing figures are show n on pages 4 and 5:
-
-
Air conditioning unit (m ain parts, buttons and display)
Rem ote control (buttons)
They w ill help you find the buttons and understand the sym bols displayed.
◆ In the m ain part of the docum ent, you w ill find a series of step-by-step procedures for each
function available.
The illustrations in the step-by-step procedures use four different sym bols:
◆
NOTE
◆
PRESS
PUSH
IMPORTANT
Moreover, applicable, w herever the illustrations show the positions of the buttons on both the
rem ote control and the unit itself.
For the...
The illustrations have a...
Remote control
Dark background.
Example:
Unit itself
White background.
Example:
E-6
Inserting the Remote Control Batteries
You m ust insert or replace the rem ote control batteries w hen:
◆ You purchase the air conditioner
◆ The rem ote control does not w ork correctly
Use two LR03 (R03) 1.5 V batteries. Do not use old
◆
batteries or different kinds of batteries together.
Batteries may be completely discharged after 12 months,
even if they have not actually been used.
1
2
Push the battery cover on the rear of the remote control with your thumb in
the direction of the arrow and remove it.
Insert the two batteries, taking care to respect the polarities:
◆
◆
+ on the battery with + on the remote control
– on the battery with – on the remote control
3
Close the cover by sliding it back until it clicks into place.
Result:
You can control all the functions on your air conditioning unit
directly from your seat, using the remote control.
E-7
Cooling Your Room
You m ust select the Cool m ode if you w ish to low er the tem perature
in your room . You can also set the fan speed.
1
If necessary, press the
(On/Off) button.
Remote Control
Control Panel
Result:
◆
◆
◆
The operating mode indicator (COOL or FAN) on the
unit comes on.
The air conditioner starts up in the mode selected
when the unit was last used.
The unit beeps twice.
The air conditioner is fitted with a protection mechanism to prevent
the unit from being damaged when it is started immediately after
being:
◆
◆
◆
Plugged in
Stopped
It will start up normally after a three-minute rest period.
2
If the COOL indicator is not lit up on the unit:
◆
◆
Press the COOL button on the remote control
or
Press the POWER/MODE button on the unit one or more times until
the COOL indicator lights up
Result:
◆
◆
The unit beeps each time you press POWER/MODE.
The air conditioner starts up in Cool mode.
You can change modes at any time.
◆
3
To adjust the temperature, press the
or
buttons on the remote
control one or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:
◆
◆
Each time you press the temperature buttons:
–
The temperature is adjusted by 1°C and
displayed on the control panel
The unit beeps
–
The air conditioner starts cooling if the room temperature
is higher than the selected temperature.
4
5
To set the fan speed to...
Then...
High
Low
Press the
Press the
button on the remote control.
button on the remote control.
Result:
Each time you press a button, the unit beeps.
To control the direction of the air flow, refer to page 10.
E-8
Airing Your Room
If the atm osphere in your room is stale, you can air it using the Fan
feature and if necessary, evacuate the stale air outside.
1
2
If you wish to evacuate stale air outside, push the ventilation lever on the
front of the unit to the right and the open position ( ).
Result: The air inside the room circulates and stale air is evacuated
outside.
Otherwise, push the ventilation lever to the left and the closed position (
Result: The air simply circulates inside the room.
).
If necessary, press the
(On/Off) button.
Remote Control
Control Panel
Result:
◆
◆
◆
The operating mode indicator (COOL or FAN) on the
unit comes on.
The air conditioner starts up in the mode selected
when the unit was last used.
The unit beeps twice.
3
If the FAN indicator is not lit up on the unit:
◆
Press the FAN button on the remote control
or
◆
Press the POWER/MODE button on the unit one or more times until
the FAN indicator lights up
Result:
◆
◆
The unit beeps each time you press POWER/MODE.
The air conditioner starts up in Fan mode.
◆
◆
You can change modes at any time.
◆
When the air conditioner is in Fan mode, the
temperature is not displayed; moreover, you do not
need to set the temperature.
4
5
To set the fan speed to...
Then...
High
Low
Press the
Press the
button on the remote control.
button on the remote control.
Result:
Each time you press a button, the unit beeps.
To control the direction of the air flow, refer to page 10.
E-9
Adjusting the Air Flow Direction Horizontally
Depending on the position of the unit in your room , you can adjust
the orientation of the inner air flow blades on the right-hand side of
the unit, thus increasing the efficiency of the air conditioner.
Remote Control
1
Press the
Result:
button on the remote control.
The inner blades swing automatically left and right.
2
To stop the blades moving left and right, press the
button again.
To stop the blades in a specific position and orient the air flow in the
◆
corresponding direction, simply press the
blades are in the desired position.
button when the
Adjusting the Air Flow Direction Vertically
Again depending on the position of the unit in your room , you can
adjust the orientation of the outer air flow blades on the right-hand
side of the unit.
RECOMMENDATION
When...
Adjust the blades to face...
Cooling
Upwards.
Adjust the air flow blades to the desired position, by pushing them upwards or
downwards.
If you orient the air flow blades downwards and the unit operates in Cool mode
for a long period of time, dew may:
◆
◆
◆
Form on the surface of the blades
Drip from the blades
E-10
Switching the Unit Off Automatically (Off Timer)
You can set the tim er to sw itch the air conditioner off autom atically
at a given tim e.
Exam ple:
You w ish to sw itch the unit off tw o hours after you
have gone to bed.
Remote Control
Control Panel
1
If necessary, press the
(On/Off) button.
2
Select the required mode by pressing the appropriate button:
◆
◆
COOL or FAN on the remote control
POWER/MODE button on the unit (press it one or more times until
the appropriate operating mode indicator lights up)
3
Set the operating time by pressing:
◆
◆
◆
TIMER
or
on the remote control one or more times.
Example: To switch the unit off two hours after you have gone to bed, set
the operating time to 2 hours.
Possible operating times are between 1 and 24 hours inclusive.
Result:
◆
◆
The Hour indicator flashes for about ten seconds.
The operating time is displayed and decreased
automatically to indicate the remaining time.
The air conditioner switches off automatically when
the operating time reaches zero.
◆
You can change your setting at any time.
◆
Cancelling the Off Timer
If you no longer w ish to use the Off Tim er that you have set, you can
cancel it at any tim e.
Remote Control
Control Panel
To cancel the timer, press:
◆
◆
◆
TIMER
or
on the remote control one or more times until “--” is displayed.
Result:
◆ The unit beeps each time you press a button.
◆ The Hour indicator on the unit switches off.
◆ The air conditioner operates normally.
E-11
Operating Recommendation
Here is a recom m endation that you should follow w hen using your air conditioner.
Topic
Recommendation
Power failure
If a power failure occurs when the air conditioner is
operating, the unit is switched off. When the power
returns, you must press
(On/Off) to restart it.
Temperature and Humidity Ranges
The follow ing table indicates the tem perature and hum idity ranges w ithin w hich the air conditioner
can be used.
Mode
Indoor Temperature
Outdoor Temperature
Indoor Humidity
Cooling
21°C to 32°C approx.
21°C to 43°C approx.
80% or less
If the air conditioner is used at...
Then...
Higher temperatures
The automatic protection feature may be triggered and the air
conditioner stopped.
Lower temperatures
A water leakage or some other malfunction may happen if the
heat exchanger freezes.
Higher humidity levels
Water may condense on and drip from the surface of the unit if it is
used for long periods.
E-12
Cleaning Your Air Conditioner
To get the best possible use out of your air conditioner,
you must clean it regularly by two weeks to remove the dust on the air filter.
Before cleaning your air conditioner, ensure that it is
switched off and unplugged from the wall socket.
◆
Open the front grille by pulling on the tabs of the unit.
1
The removal of the front grille makes it easier to clean the air
conditioner. After opening the front grille, lift it up as much as
possible, then pull down to release it.
◆
Grasp the handle on the air filter and lift it slightly and then out to the front.
Remove all dust on the air filter with a vacuum cleaner or brush.
When you have finished, slide the air filter back into position.
2
3
4
5
Front grille
Clean the outer surfaces with a damp cloth and mild detergent
(do NOT use benzene, solvents or other chemicals).
Wipe them dry with a clean, soft cloth.
Front grille
Grille groove
Body guide
If you...
Then...
◆
Will not be using the
air conditioner for a
long period of time
◆◆Set the fan going for a few hours
to dry the inside of the air conditioner
thoroughly.
◆◆Switch the air conditioner off and
unplug it from the wall socket.
◆◆Clean the filter and outer surfaces.
Have not used the air
conditioner for a long
period of time
Set the fan going for a few hours to
dry the inside of the air conditioner
thoroughly.
E-13
Solving Common Problems
Before contacting the after-sales service, perform the follow ing sim ple checks. They m ay save you
the tim e and expense of an unnecessary call.
Problem
Explanation/Solution
The air conditioner does not
operate at all
◆
◆
◆
Check that the circuit breaker used for the air conditioner has not been
triggered.
Check that the power cable is plugged into a wall socket and the socket
is switched on, if necessary.
Check that the operating mode indicator (COOL or FAN) on the
unit is lit up; if necessary press
(On/Off) on the remote control or unit.
The air conditioner does not
operate with the remote control
◆
◆
◆
Check that there are no obstacles between you and the unit.
Replace the remote control batteries if necessary.
Check that you are close enough to the unit (seven metres/yards or less).
No beep is heard when you press
(On/Off) on the remote control
◆
◆
Check that you are pointing the remote control at the remote control
sensor on the unit.
Replace the remote control batteries if necessary.
The air conditioner does not
cool
◆
◆
◆
Check that the correct operating mode has been selected COOL.
The room temperature may be too low.
Dust may be blocking the air filter; refer to page 13 for cleaning
instructions.
◆
◆
Check that there is no obstacle blocking the air flow into or out of the unit.
The air flow direction does not
change when you press the
button
Check that the air conditioner has been switched on; if necessary, press
(On/Off) on the remote control or unit.
The timer is not correctly triggered
◆
◆
Check that the timer has been programmed correctly; refer to page 11.
Air the room.
Odours are permeated in the
room during air conditioning
E-14
Installing a Filter
The air conditioner can be fitted w ith an Electrostatic filter to rem ove
m inute dust particles. The service life of the filter is approxim ately three
m onths depending on the tim e during w hich the air conditioner is used.
Remove the vinyl packing from the filter.
1
Filter guard
Filter holder
Do not remove the packing from an electrostatic filter until you
wish to use the filter, as it will lose its properties.
◆
Open the front grille by pulling on the tabs of the unit.
2
3
Grasp the handle on the air filter and lift it slightly and then out to the front.
Remove the filter guard into the air filter.
4
5
Insert the Electrostatic filter in the filter holder and then re-assemble
it in the original condition.
Air filter
◆ Air purifying system
Model
Electrostatic filter
supplied
AW127JE/B
AW147JB
AW12A7JD
AW12A7JA
Electrostatic filter
AW126JE/B
AW146JB
AW12A6JD
AW12A6JA
WC12ZR
not supplied
Technical Specifications
Design and specifications are subject to change without notice.
Model
Power Supply
AW127JE
AW126JE
WC12ZR
220-240V~, 50Hz
AW127JB
AW126JB
AW147JB
AW146JB
220V~, 60Hz
AW12A6JD
AW12A7JD
200-220V~, 50Hz
115V~, 60Hz
AW12A6JA
AW12A7JA
E-15
Method of Installation
Before installation, be sure to check the installation area
for the air conditioner, and installation method of the drain hose.
Checkpoints prior to installation
1 Check the cabinet and front grille of the unit for any harmful defects
such as scratches.
2 Be sure to check the power supply.
- Refer to the specifications on the label attached to the unit.
Installation Conditions
1 As the unit is heavy, the wall or window of the installation area should
have sufficient strength and durability for operation of the air conditioner,
and for prevention of any vibration or noise.
If it is weak, reinforcement work should be performed separately.
2 It is advisable to install the air conditioner in the north or west side to
prevent the effect of direct sunlight.
When installing it in the south or east side due to unavoidable
circumstances, it is advisable to install the sunshade to prevent the
direct sunlight.
In this case, take care not to cause any hindrance to the flow of outside air.
3 When installing the air conditioner, be sure to obtain sufficient space on
the rear side of the unit for smooth flow of air.
When operating the air conditioner in closed areas such as inner building
with cooling operation, and result in trouble with the unit.
See the illustration below.
Awning
85mm
min.
300mm
220mm
500mm
Fance, wall
or other
obstacle
500mm
500mm
Approx.3˚
750mm
150mm min.
◆
◆◆If the wall is greater than 150mm thick,
cut the wall back on a 45˚ angle if possible.
45˚
45˚
100mm or more
E-16
Installation of the Drain Tube
Fix the drain tube as shown in the figure.
Rear
Rubber cap
Gasket
Drain Tube
Screws(2EA)
Installation of the Drain Pan
The procedure for installing the drain pan should be determined by the
condition of the installing area.
◆◆In the case of an area where the drain pan can not be directly
installed on the rear side of the unit after installing the air conditioner.
Example: High storage
Open the front grille ; refer to page 13.
1
2
Screw
Remove the screw located at the lower section of the front grille.
Front grille
It is secured in the
section depending on the model.
Remove the front panel.
3
3-1 Press both sides of the cabinet in the direction of the arrow
as shown in the figure.
3-2 Pull the lower part of the front panel slightly forward.
(below three inches / 7cm)
3-3 Lift the front panel upward.
Applying excessive force to remove the front panel may cause
◆
damage to the tab ; be sure not to use excessive force.
Front panel
Remove two screws on the lower, right and left sides of the unit.
4
5
6
7
Remove the chassis from the cabinet.
Remove the rubber cap inserted into the basepan.
Fix the drain pan as shown in the figure, and then connect the drain hose.
(You can use any commercially-available drain hose.)
Install the cabinet at the specified area after installing the drain pan,
and then re-assemble it in the original condition.
8
Screw
Secure the front panel to the case by replacing the screw removed in
step 2. If a screw not removed in step 2, secure the panel with a
supplied screw.
◆
Rear
Rubber cap
Drain Hose
◆◆In the case of an area where the drain pan can be directly installed
on the rear side of the unit after installing the air conditioner.
Drain Pan
Follow steps 6 and 7 only
1
Bottom-Side View with
Drain Pan and Hose in Place
E-17
THIS AIR CONDITIONER IS MANUFACTURED BY:
ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR:
CE CLIMATISEUR EST FABRIQUE PAR:
ESTE APARELHO DE AR CONDICIONADO É FABRICADO POR:
QUESTO CONDIZIONATORE D’ARIA È PRODOTTO DA:
ELECTRONICS
Printed in Korea
|