PS250 Platform Scale
8VHUꢀ,QVWUXFWLRQV
0DQXHOꢀG·XWLOLVDWLRQ
%HGLHQXQJVDQOHLWXQJ
,VWUX]LRQLꢀSHUꢀO·XWHQWH
MULTI-LINGUAL
76103-57D8oIwssnuloea0d fromꢀWwꢁw.Soꢂmanꢃualsꢄ.comꢅ. AllCManꢆualsꢁSeaꢇrch Aꢀnd Download.
25.03.2002
©Salter Brecknell Weighing 2002. All rights reserved.
The information contained herein is the property of Salter
Brecknell Weighing and is supplied without liability for errors or
omissions. No part may be reproduced or used except as
authorised by contract or other written permission. The
copyright and the foregoing restriction on reproduction and use
extend to all media in which the information may be embodied.
PS250 User Instructions
Contents
page no.
Safety
Warnings
Safe installation
Safe use
Cleaning the machine
EMC compliance
3
1
About your machine
ꢀ
1.1 Description
1.2 Display
5
1.3 Key functions
1.4 Error codes
1.5 Specification
1.6 Power supply
2
3
Weighing
ꢁ
2.1 Hold function
10
Setup mode
ꢂꢃ
3.1 Function setup
3.2 Calibration
12
14
PS250 User Instructions
i
Declaration of Conformity
Manufacturer
Type
Salter Brecknell
PS250
corresponds to the requirements of the following EC directives:
EMC Directive
EMC 89/336/EEC
LVD 73/23/EEC
Low Voltage Directive
The applicable harmonised
standards are:
EN60950, EN50081–1,
EN50082–1
A copy of the original signed declaration for this instrument is available
from:
Salter Brecknell Weighing, P.O. Box 9533, Smethwick, West Midlands, B66 2TE
Déclaration de Conformité
Fabricant
Type
Salter Brecknell
PS250
Correspond aux exigences des directives CE suivantes:
Directive CEM
CEM 89/336/EEC
LVD 73/23/EEC
Directive Basse Tension
Les standards harmonisés
EN60950, EN50081–1,
applicables sont:
EN50082–1
Une copie originale de la déclaration signée pour cet instrument est
disponible à:
Salter Brecknell Weighing, P.O. Box 9533, Smethwick, West Midlands, B66 2TE
Konformitätserklärung
Hersteller
Typ
Salter Brecknell
PS250
entspricht den Anforderungen der folgenden EU-Richtlinien:
EMV-Richtlinie
EMC 89/336/EEC
LVD 73/23/EEC
Niederspannungsrichtlinie
EN60950, EN50081–1,
EN50082–1
Die angewendeten
harmonisierten Normen sind:
Eine Abschrift der original unterschriebenen Konformitätserklärung ist
unter unten genannter Adresse erhältlich:
Salter Brecknell Weighing, P.O. Box 9533, Smethwick, West Midlands, B66 2TE
Dichiarazione di conformità
Produttore
Modello
Salter Brecknell
PS250
è conforme alle caratteristiche previste dalle seguenti direttive CE
Normativa EMC
89/336/CE
73/23/CE
Normativa per la bassa tensione
Le norme standard armonizzate
applicate sono:
EN60950, EN50081–1,
EN50082–1
Se richiesto, è disponibile una copia dell’originale certificato firmato da:
Salter Brecknell Weighing, P.O. Box 9533, Smethwick, West Midlands, B66 2TE
-
Electromagnetic Compatibility Statement for North America
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not installed and used in accordance with
the instructions manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his/her own expense.
PS250 User Instructions
1
Safety
Warnings
Safe installation
Take care when lifting and transporting heavy objects.
Do not overload the machine. Take care not to exceed the
weighing capacity of the machine.
Pluggable equipment must be installed near an easily
accessible socket outlet. Permanently connected equipment
must have a readily accessible disconnect device incorporated
in the fixed wiring.
For your protection all mains (110V or 230V) equipment used
out of doors or in wet or damp conditions should be supplied
from a correctly fused source and protected by an approved
RCD to BS7071 or BS7288 or BS4293.
The mains lead must be connected to a supply outlet with a
protective earth contact. The electrical supply at the socket
outlet must provide overcurrent protection of an appropriate
rating.
IF IN DOUBT SEEK ADVICE FROM A QUALIFIED
ELECTRICIAN.
Safe use
To avoid the possibility of electric shock or damage to the
machine, always switch off the machine and isolate from the
power supply before carrying out any routine maintenance.
Cleaning the machine
CAUTION: Harsh abrasives, solvents, scouring cleaners and
alkaline cleaning solutions, such as washing soda, should not
be used especially on the display windows. Under no
circumstances should you attempt to wipe the inside of the
machine.
PS250 User Instructions
3
The outside of standard products may be wiped down with a
clean cloth moistened with water containing a small amount of
washing up liquid or disinfectant
EMC compliance
The following warning may be applicable to your machine.
WARNING:This is a class A product. In a domestic environment
this product may cause radio interference in which case the
user may be required to take adequate measures.
4
PS250 User Instructions
1 About your machine
1
About your machine
1.1
Description
The PS250 is a self contained portable platform scale with a
remote display. The platform is constructed of mild steel; it
has four adjustable feet for levelling and a non-slip mat for the
platform. A bracket and fixings are supplied for desk or wall
mounting the indicator head. For best results, always install
the platform on a hard, flat, level surface.
A stainless steel platform version is available.
1.2
Display
SALTER
Brecknell
ON-OFF
Net
ZERO
UNITS
kg/x
HOLD
TARE
0
è0ç
T
kg
888888.8 lb oz
Low
250kg x 0.1kg/550lb x 0.2lb
PS250
Stable
Minus
Net weight
net
Hold weight
Centre of zero
Low battery
weighing mode
weighing mode
lb
0
kg
Low
1.3
Key functions
ZERO
Zero/ON/OFF key. Switches the scale on or off.
è0ç
TARE
T
Tare key.
Applies a tare value
PS250 User Instructions
5
1 About your machine
UNITS
kg/x
Units key
Selects weighing units
HOLD
Hold key
Retains average weight display.
1.4
1.5
Error codes
Err
Overload
ErrL
ErrE
Below zero
EEprom error
Low battery warning
Low
Specification
Capacity/resolution
250kg x 0.1kg
550lb x 0.2lb
Height 25mm
7 segment LCD
5º C to 35º C
22kg
Display
Operating temperature
Weight
Dimensions
Platform
900mm x 550mm x 50mm
270mm x 90mm x 45mm
Display head
Power supply
6 x 1.2V metal hydride
rechargeable batteries
Recharge adaptor
1 x 100V-240V AC/13V DC
6
PS250 User Instructions
1 About your machine
1.6
Power supply
The indicator head contains six metal hydride re-chargeable
batteries. The low battery indicator Low is displayed when the
battery power is insufficient to power the scale.
Recharging the batteries
Insert the AC re-charger adapter into the socket on the
indicator head to recharge the batteries.
Recharging time is approximately 14 hours.
Fully charged batteries should give approximately eight hours
of continuous use.
CAUTION: Always connect the AC adaptor to the indicator
head before connecting to the mains power supply.
Disconnect from the mains power supply before disconnecting
the adaptor from the indicator head.
AC adaptor
The 100V/240V recharge adaptor supplied with the PS250 is
provided with four convertion connectors:
2 pin European
3 pin UK
2 pin USA
2 pin Australia
PS250 User Instructions
7
2 Weighing
2
Weighing
For best results, always weigh on a hard flat and level surface.
The platform has four adjustable feet for levelling.
ZERO
è0ç
Press
to switch on the scale. The display will show
ꢀꢀꢀꢀꢁthen go to weighing mode. If the display does not show
ZERO
è0ç
ꢂꢃꢂ or ꢂ press
.
ZERO
è0ç
To switch off the scale, press and hold
.
1. If necesssary, zero the scale.
ZERO
è0ç
0
kg
0.0
15.3
2.
kg
Using tares
3.
ZERO
è0ç
0
kg
0.0
8
PS250 User Instructions
2 Weighing
4.
kg
15.3
net
TARE
T
0
kg
0.0
5.1
5.
net
kg
6. To cancel a tare
net
kg
15.3
0.0
ZERO
è0ç
0
kg
Weighing units
UNITS
kg/x
Press
to toggle between kg, lb and oz.
PS250 User Instructions
9
2 Weighing
2.1
Hold function
This function enables you to weigh oversized objects that may
obscure the display. The system calculates an average
weight reading and displays this weight value. This makes
the hold function ideal for weighing animals that may be
moving around on the platform.
1.
0
kg
0.0
2.
HOLD
0
kg
0.0
3.
kg
16.3
When the annunciator stops flashing, the weight is
displayed and remains even when the load is removed.
kg
16.3
10
PS250 User Instructions
2 Weighing
4. To cancel the hold:
HOLD
0
kg
0.0
PS250 User Instructions
11
3 Setup mode
3
Setup mode
3.1
Function setup
In setup mode you can configure the following functions:
•
•
•
weighing unit
auto shut-off
calibration weight
Auto shut-off switches off the scale if no activity is sensed
during the period set. The time values are in seconds. To
disable auto shut-off, select 2)).
Calibration weight allows you to select full load, 0.5 load or
0.25 load of the machine capacity for calibration. The table
lists the actual weight value you should use.
1/2 load
1/4 load
Weighing Full load
units
kg
200 kg
500 lb
100 kg
200 lb
50 kg
lb
100 lb
Calibration weights
12
PS250 User Instructions
3 Setup mode
Set
CAL
Unit
A.OFF
120
CAP
180
divS
300
GrAv
End
ꢄꢅꢆ
240
OFF
lb
kg
oz
ON
OFF ON
OFF ON
OFF
Setup menu
Navigating the setup menu
TARE
1. Press and hold
until display shows 6(7
T
(approximately three seconds).
TARE
2. Release
, display shows 81,7.
T
UNITS
kg/x
3. Press
require.
to move across to the option or value you
HOLD
4. Press
to select an option and save.
To exit the setup menu and save your changes:
UNITS
kg/x
Press
until you see End.
HOLD
Press
mode.
to save your changes and return to weighing
PS250 User Instructions
13
3 Setup mode
3.2
Calibration
1. In setup mode, select &$/ꢁand then select whether you you
want to use 1/2, full or 1/4 load for calibration (see
’Calibration weights’on page 12). The example shown in
these instructions uses kg weight units and 1/2 load. Save
your selection and then switch off the scale.
1.
Hold
ZERO
è0ç
At the same time
UNITS
kg/x
x 3
lb
4076
Display shows zero count value.
2.
TARE
T
0
lb
0
14
PS250 User Instructions
3 Setup mode
3.
to select alternate units
0
UNITS
kg/x
lb
0
0
kg
0
4.
5.
100kg
kg
7978
TARE
T
kg
cal lb oz
kg
100.0
PS250 User Instructions
15
P.O. Box 9533, Smethwick,
West Midlands, B66 2TE
Tel UK: 0870 444 6132 Fax UK: 0870 010 2241
Email:
Email:
Salter Brecknell Weighing,
3620 Central Avenue NE, Minneapolis,
MN 55418, USA.
Tel: 612 781 4211 Fax: 612 781 4320
|