PCIe USB 2.0 Card 4+1 Ports RC503
User Manual
PCIe USB 2.0 Card 4+1 Ports RC503
User Manual
Package Contents
•
•
1 x PCIe USB 2.0 Card 4+1 Ports
1 x User’s Manual
Hardware Description
3
PCIe USB 2.0 Card 4+1 Ports RC503
User Manual
Hardware Installation
•
•
•
•
Turn Off the power to your computer.
Unplug the power cord and remove your computer’s cover.
Remove the slot bracket from an available PCIe slot.
To install the card, carefully align the card’s bus connector with the
selected PCIe slot on the motherboard. Push the board down
firmly.
•
•
•
Connect the system power source to the board’s power connector.
Replace the slot bracket’s holding screw to secure the card.
Replace the computer cover and reconnect the power cord.
Driver Installation
Important: If your system doesn’t boot to Windows properly with our
card installed, check with your system’s manufacturer for the latest
system firmware update.
4
PCIe USB 2.0 Card 4+1 Ports RC503
User Manual
For Windows® XP/2000
Windows® XP/2000 will automatically detect and install the correct
driver for the PCIe USB 2.0 4+1 Ports.
However, please ensure you have the latest Service Pack Installed.
For Windows® XP
Windows® XP Service Pack 1 or later
For Windows® 2000
Windows® 2000 Service Pack 4 or later
For Windows® Server 2003/Vista
Windows® Server 2003/Vista has built-in driver support for this
controller. Just install the board and Windows will automatically detect
and install the correct drivers for it. No additional driver is necessary.
To Verify Windows Installation
Right click My Computer, then click Manage. Click Device Manager.
Double click Universal Serial Bus controllers option.
- NEC PCI to USB Open Host Controller
- NEC PCI to USB Open Host Controller
- Standard Enhanced PCI to USB Host Controller
- USB 2.0 Root Hub
5
PCIe USB 2.0 Card 4+1 Ports RC503
User Manual
(USB Root Hub in Windows® XP, Server 2003 and Vista)
- USB Root Hub
- USB Root Hub
Thank you for purchasing a quality Rosewill Product.
warranty information and future support for your product.
6
|