Connect your various devices such as a laptop computer, wireless microphone,
or other line level devices to Inputs 3 and 4. Remember Channel 4 is MONO,
and Channel 3 is STEREO.
Connect a stereo signal source such as a CD player, cassette player, or a video
player's audio output to Channel 1, and a microphone to Channel 2. If the micro-
phone requires phantom power, move the phantom power jumper as described
on the previous page.
Adjust the levels of each channel for a desired balance of signals. Since the
MX56c has no master level, you will need to be aware of the setting of your am-
plifier. Check each mic/source level individually first for proper level, then adjust
them for a desired mix.
Rolls Corporation
Salt Lake City, UT 10/05
Owners Manual
|