•
•
To return to auto-detect mode, turn the
switch box OFF, then ON or connect a new
HDMI device.
Your HDMI switch box memorizes the last
HDMI device used. The switch box detects
and connects to that HDMI device first.
Remote control mode
Back
External display
(HDTV, projector, etc.)
HDMI Switch Box
1
Press POWER ON/OFF on the remote
control. The power LED lights red.
HDMI device 3
HDMI device 1
2
Press a number button or
switch between devices.
/
to
Features
To replace the battery in your remote
control:
Auto-detect mode
•
Allows up to 4 HDMI components
Your HDMI switch box will automatically
switch to the most recently powered-on
device. When a device is powered off, the
switch box will automatically switch to
the next device that is powered on in the
following sequential order:
to be connected to one HDMI input
simultaneously
1
Remove the battery holder from the
remote control.
AC adapter
•
•
1080p compatible
Supports auto-switching and includes
IR remote
•
•
Supports Dolby® TrueHD and DTS®-HD
Lossless audio formats
Plug-and-play, easy to install
Package contents
• HDMI switch box
Note: Not all HDMI devices support auto-
switching. If the switch box fails to switch
to the desired input when the device is
turned on, use the remote control or manual
switching mode.
• 5V DC 1A power adapter
• Remote control with battery
2
3
Remove the old battery, then insert
a CR2025 battery into the battery
holder, positive (+) side up.
Slide the battery holder back into the
remote control.
Manual mode
Front
Press POWER/SELECT on your switch
box to switch to a different device. The
corresponding LED lights green.
HDMI device 4
HDMI device 2
1
2
3
4
POWER / SELECT
Connecting your HDMI switch box
Using your HDMI switch box
1
Connect an HDMI cable from the
HDMI output of each component
to one of the HDMI inputs on the
switch box.
Remove the plastic tab that extends
past the bottom edge of the remote
control. This tab protects the battery.
The remote control will not work until it
is removed.
2
3
Connect an HDMI cable from the
HDMI output on the switch box to
an HDMI input on your TV.
Connect the included power
adapter to the DC input jack on the
HDMI switch box and plug it into a
standard 110V AC outlet.
#
1
2
3
Description
Device LEDs: The LED of the selected device lights green.
Power LED: Lights red when the switch box is turned on.
Your HDMI switch box operates in
three modes: Auto-detect (default),
manual, and remote control.
Notes:
POWER/SELECT: Press and hold for 3 seconds to turn the switch box on or off.
Press and release quickly to switch between devices.
•
When remote control or manual mode
is used, auto-detect mode becomes
disabled. Use the remote control or
press POWER/SELECT on the switch
box to select an HDMI device.
RF-HDMI4
USER GUIDE
RF-HDMI4 QSG_08-1798_V1_EN.indd
1
12/17/2008 5:25:23 PM
|