Remington Styling Iron S 3000i User Guide

REMINGTON MONEY BACK OFFER  
If within 30 days after you have purchased your  
Remington® product, you are not satisfied and would like  
a refund, take back the product and sales slip indicating  
purchase price and date of purchase to the retailer from  
whom the product was purchased. Remington® will  
reimburse all retailers who accept the product within 30  
days from the date of purchase. If you have any questions  
concerning the money back guarantee, please call  
800-736-4648 in the U.S.  
• Select desired temperature setting. Start with  
a low setting and gradually increase heat  
as needed based on hair type.  
IMPORTANT INFORMATION  
USER MAINTENANCE  
INSTRUCTIONS  
Make sure the unit is unplugged and  
cool. Clean the outside of the power  
handle with a slightly damp cloth. Wipe  
the plates with damp cloth. No other  
maintenance is required.  
ADDITIONAL INFORMATION  
®
®
MC  
Always heat the unit with the locking  
switch in the UNLOCK position.  
NEVER heat the unit when the locking  
Locking Switch  
TM  
To lock the straightener in the closed position for  
travel or storage, squeeze the plates together and  
turn the locking switch clockwise. Make sure to  
unlock the appliance before plugging it in the next  
time. Simply turn the locking switch counter-  
clockwise to unlock it.  
• Plug in the unit. The ON indicator will glow  
red, and in a few minutes it will be ready for  
use.  
P
ROTECT& HINE  
S
switch is in the LOCKED  
position.  
PROFESSIONAL STRAIGHTENER  
with 3X protection  
• Hold unit only by the handle; other areas  
get hot when in use.  
• Hair should be completely dried before  
using a straightening iron.  
• DO NOT use an abrasive cleaning fluid  
or material to clean the plates, as damage  
will occur. After the unit has cooled, wipe  
the plates with a damp cloth.  
To make styling easier, use clips to section  
your hair: top, sides, and back.  
STORAGE  
When not in use, unplug the unit. Allow  
it to cool, empty tank and store out of  
reach of children in a safe, dry location.  
DUAL VOLTAGE USE  
• Always start from the back of your neck,  
continue over the sides and finish with the  
front section.  
This product contains a special electronic circuit.  
This circuit automatically adjusts to worldwide  
voltage. When traveling overseas, this product  
can be plugged into any voltage outlet without  
your having to adjust the product manually in any  
way. In some overseas countries, an attachment  
plug adapter of the proper configuration for the  
power supply receptacle may be required. DO  
NOT USE a voltage converter or extension cord  
with this product.  
• DO NOT scratch the surface of the plates,  
as this will diminish the effectiveness  
of the non-stick Teflon® plus Ceramic and  
Ionic coating.  
Never wrap the cord around the appliance  
since this will cause the cord to wear  
prematurely and break. Handle cord  
carefully, and avoid jerking, twisting or  
straining it especially at plug connections.  
Take a small section of hair and pull it taut.  
Holding the appliance with the other hand,  
start at the roots and clamp the hair firmly  
between the plates.  
Questions or Comments:  
Please call 800-736-4648 in the U.S.  
The red indicator light is for power supply  
indications only - this is not to show when  
the unit is ready to use.  
This product will bear one or more compliance marks,  
Listed by Underwriters Laboratories, Inc.  
• With the plates clamped together, run the  
straightener down the entire length of hair,  
from roots to ends, without stopping.  
120-240 VAC 50/60Hz  
• DO NOT get the unit too close to scalp,  
face, ears, neck or skin.  
Remington and Protect & Shine are trademarks of Remington  
Products Company, L.L.C.  
is a registered trademark of E. I. du Pont de Nemours  
Company and is used under license by Remington Products  
Company, L.L.C.  
• Repeat until the desired amount of  
straightening has been achieved.  
STRAIGHTENING YOUR HAIR  
• After use, allow unit to cool completely  
before storing.  
Take extra care when using a Professional  
Straightening iron. It is important to set the  
correct temperature for your hair type before  
styling to prevent damage to the hair.  
© 2003 R.P.C., L.L.C. Job #WPC03-121 11/03 Part No. 15050  
+ Ceramic  
+ Ions  
WARNING:The plates of this professional  
straightener will get very hot within a few  
seconds. Do not touch the plates or let  
them come in contact with the skin once  
the straightener has been turned on.  
Remington Products Company, L.L.C.  
60 Main Street  
Bridgeport, CT 06604  
• Make sure the locking switch is in the  
unlocked  
position.  
for beautiful, healthy,  
shiny hair  
MADE IN CHINA  
S-3000i  
 

Pyramid Car Audio Car Stereo System CDR 36DX User Guide
Raymarine GPS Receiver PowerPilot User Guide
Remington Power Tools Chainsaw 104317, PS1510A User Guide
Roland Musical Instrument KR117 115 User Guide
Rosewill Network Card RWND N1501UB User Guide
Samsung Computer Drive SW 240 User Guide
Samsung Digital Camera Digimax 200 User Guide
Samsung Printer SRP 350 User Guide
Samsung Refrigerator SR L628EV User Guide
Sears Treadmill 831249220 User Guide