Remington Electric Shaver CORDLESS RECHARGEABLE SHAVER User Guide |
®
■ Use this shaver only for its intended use as
described in this manual. Do not use attach-
ments not recommended by the manufacturer.
■ Keep the cord away from heated surfaces.
■ Never operate this shaver if it has a damaged
cord or if it is not working properly, if it has been
dropped or damaged, or dropped into water.
Return the shaver to a service center for
examination and repair.
IMPORTANT SAFETY
INSTRUCTIONS
MicroScreen® 1
CORDLESS
RECHARGEABLE SHAVER
Read all instructions before using this shaver. When
using an electric shaver, basic precautions should
always be followed, including the following.
■ Never drop or insert any object into any opening.
DANGER
■ Do not reach for a shaver that has fallen into
water. Unplug immediately.
■ Do not use outdoors or operate where aerosol
(spray) products are being used or where
oxygen is being administered.
■ Do not use this shaver with a damaged or
broken cutting unit, as facial injury may occur.
■ Always attach plug to shaver, then to outlet. To
disconnect, turn all controls to OFF, then remove
plug from outlet, then detach power cord from
the shaver for storage.
■ Always store your shaver and cord in a
moisture-free area. Make sure the cord is dis-
connected from the shaver.
To reduce the risk of electric shock:
■ Do not use while bathing or in a shower.
■ Do not place or store shaver where it can fall or
be pulled into a tub or sink. Do not place in or
drop into water or other liquid.
■ Except when charging, always unplug this
shaver from the electrical outlet immediately
after using.
■ Unplug this shaver before cleaning.
■ Household use only.
WARNING
To reduce the risk of burns,fire, electric shock, or
injury to persons:
■ A shaver should never be left unattended when
plugged in, except when charging your
rechargeable shaver.
■ Close supervision is necessary when this shaver
is used by, on or near children or invalids.
SAVE THESE
INSTRUCTIONS
SF-3
®
The EPA certified RBRC Battery Recycling Seal on the nick-
el-cadmium (Ni-Cd) battery indicates Remington is voluntarily
participating in an industry program to collect and recycle
these batteries at the end of their useful life,when taken out
Headguard
Cleaning Your Shaver
TO ASSURE SMOOTH, EFFICIENT PERFORMANCE,
IT IS IMPORTANT TO CLEAN YOUR SHAVER.
CAUTION: Do not remove or replace the head
assembly while shaver is
®
of service in the United States or Canada.The RBRC pro-
gram provides a convenient alternative to placing used Ni-Cd
batteries into the trash or the municipal waste stream,which
may be illegal in your area.Please call 1-800-8-BATTERY™
for information on Ni-Cd battery recycling and disposal
bans/restriction in your area.Remington involvement in this
program is part of our commitment to preserving our environ-
ment and conserving our natural resources.”
Head
Assembly
Single
Flexible Foil
running as it may cause
damage to the unit.
■ After each shave, turn
off shaver and remove
the head assembly by
grasping the head
Head
Removal
Tabs
Pop-Out Trimmer
removal tabs on both
sides of head assembly
between thumb and fore-
finger and pull straight
upward to remove.
■ Holding the cutter as
shown, brush and blow
out the hair clippings
from the cutter. Lightly
tap base of head assem-
bly on a flat surface. Do
not remove screen
ON/OFF
Button
Locking Bar
ON/OFF
Button
assembly from head
assembly. Do not use
cleaning brush on
Trimmer
Actuating
Button
screen as it may dam-
age it. When replacing
head assembly do not
press or touch the
screen.
■ To avoid possible
damage, it is not recom-
mended to remove the
cutter assembly except
for replacement.
However, if necessary to
remove the cutter
assembly, grasp cutter between thumb and forefin-
ger and gently lift upward to remove cutter from
oscillator tip. Please note the spring seated on the
GREEN
(Charging)
Indicator Light
(Model SF-3)
PLEASE NOTE: Before your first use, you may notice what appears to be small particles of white or gray dust on the foil and in or
around the area of the cutter assembly. The particles are from a coating of Molybdenum lubricant which is applied to the new foil and
cutters to provide you with extra smooth optimum shaving performance.
oscillator tip. Be careful not to lose the spring. To replace the
cutter assembly, place pin on bottom of cutter in slot of oscillator
tip and gently press downward in center of cutter until cutter
snaps into place.
Remington® Money-Back Offer
Warranty service must be performed by a Remington Company-
owned Service Center orAuthorized Service Dealer and damage or
loss of any kind resulting from servicing by any other person is not
covered under warranty. Enclosed is a listing of Company-owned
Service Centers. Authorized Service Center Dealers may be found
in the yellow pages of your directory. If you wish, you may mail the
product,postpaid,to Remington Products Company, L.L.C.,60
Main Street, Bridgeport,CT 06604 Attention:Service Department.
If within 30 days after you have purchased your
Remington Cordless Rechargeable Shaver, you are
not satisfied and would like a refund, just take back
the shaver and sales slip indicating purchase price
and date of purchase to the retailer from whom the
shaver was purchased. Remington will reimburse
all retailers who accept the shaver within 30 days
from date of purchase. If you have any questions
concerning the money back guarantee, please call
(800) 736-4648.
When Is It Time to Replace
Your Foil and Cutter?
It is very important to replace your foil and cutter when neces-
sary to ensure a close, comfortable shave without irritation.
We recommend that the foil be replaced every 6 months and
the cutter be replaced every 12 months. Here are some signs
of foil and cutter wear, indicating that replacement is needed.
U.S. Warranty Service
In the United States, service is provided
by our Company-owned Service Centers and over 300
Authorized Service Dealers. The addresses of our
Company-owned Service Centers are enclosed. For the
address of your nearest Authorized Service Dealer, please
consult the Yellow Pages under “Shaver - Electric -
Repair.” If you wish, you may mail the product, postpaid,
to Remington Products Company, L.L.C., 60 Main Street,
Bridgeport, CT 06604, Attention: Service Department.
Warranty – One Full Year
IRRITATION: As the foil gets excessively worn there may be
some skin irritation. This would be especially noticed when
applying After Shave lotion. When the cutter wears, you may
feel a sense of “pulling” and a loss of closeness when you
shave. This is an indication that it is time to replace your cutter
and foil. Visually check for any signs that the cutter has worn
through the foil. It is always best when replacing the cutter to
replace the foil at the same time.
Remington warrants that your product, except as noted below, is,
on the date of purchase, free from defect in material and work-
manship for a period of one year. Remington will replace any
product defective in materials or workmanship without charge if
you return the complete product either in person or by mail, post-
paid, to a Remington Company-Owned Service Center within one
year of the date of purchase. Please include with the returned
item a letter stating the reason for the return and the receipt
showing the date of purchase.
For questions or comments, please write:
Remington Products Company, L.L.C.
P.O. Box 1536,
Do not return the product to the retailer from which it was
purchased if defective. Warranty service must be performed by a
Remington Company-Owned Service Center. The addresses of our
Company-Owned Service Centers are enclosed. If you wish, you
may mail the product, postpaid, to:
Horsham,PA 19044-6536
Attention:Consumer Affairs
Remington Pre-Shave Powder Stick
Absorbs moisture and facial oils...shaver glides easily over
your skin. Sets up beard for a smooth, close shave. Makes
shaving quicker and more comfortable.
International Warranty Service
Remington Products Company, L.L.C.
Service under the Remington warranty can be obtained outside
the United States in Canada and England. Please consult your
local telephone directory for the nearest location. If you like, you
may mail the product to the above listed address. Please allow
eight to twelve weeks for delivery of a replacement product.
60 Main Street
Bridgeport, CT 06604
Remington Shaver Saver Lubricant
Attention: Service Department
Please allow 6 to 10 weeks for delivery of a
replacement pr oduct.
A spray to clean and lubricate your shavers’cutters and head
assembly. Helps remove hair chips while it reduces wear. Just
a quick spray after each shave keeps your shaver operating at
peak performance.
For questions or comments, please write:
Remington Products Company, L.L.C.
P.O. Box 1536
This warranty does not cover damage by accident, misuse, abuse,
lack of reasonable care, affixing an unauthorized accessory, loss
of parts or alteration to the product. REMINGTON WILL NOT PAY
FOR WARRANTY SERVICE BY A NONAUTHORIZED REPAIR
SERVICE AND WILL NOT REIMBURSE THE CONSUMER FOR
DAMAGE RESULTING FROM SERVICE PERFORMED BY A
NONAUTHORIZED REPAIR SERVICE. REMINGTON SHALL NOT
BE RESPONSIBLE FOR ANY INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES. This warranty gives you specific
legal rights. You may also have other rights which vary from state
to state. Some states do not allow the exclusion limitation of inci-
dental or consequential damages or limitations on how long a
warranty lasts, so that the above limitations and exclusions may
not apply to you.
Horsham, PA 19044-6536
Att: Customer Service
Or call: 1-800-736-4648.
Questions or Comments: Please call 1-800-736-4648.
BEFORE
AFTER
Remington and MicroScreen
are trademarks of
Remington Corporation,L.L.C.
P R O D U C T S C O M PA N Y, L . L . C .
60 Main Street, Bridgeport,CT 06604
© 1998 RPC,L.L.C.Rev. 7/98
|