#18"5GNGEVQT
YKVJ"%QORQUKVG"5/8KFGQ"%QPXGTUKQP
15-1977
OWNER’S MANUAL — Please read before using this equipment.
Two Audio/Video Outputs
let you
Your RadioShack A/V Selector with
%106'065
connect up to four sources to two different
TVs or stereo VCRs.
Composite/S-Video Conversion is a time-
saving switch box for your home audio/video
system. The selector lets you connect four
audio/video devices directly to your TV and
VCR. Once connected, each device can be
accessed with the touch of a button or remote
control. This helps to avoid the need to plug
and unplug each device when changing
audio/video sources (for example, switching
from a DVD player to a camcorder or video
game system).
Preparation ...................................................... 1
Placing The Selector .................................... 1
Connecting Devices ...................................... 1
Operation ......................................................... 3
Manually Operating the Selector .................. 3
Using the Learning Function ......................... 3
Using the Remote Control
Built-in Composite/S-Video Composite
Circuit — lets you convert composite video
(RCA) to S-Video, or S-Video to composite
video.
to Operate the Selector ................................ 3
Troubleshooting ............................................... 3
Care ................................................................. 3
Service and Repair .......................................... 4
Specifications ................................................... 4
Built-in Auto-Learning Function lets you
operate the selector with most remote
controls.
Standard Color-Coded Phono Connectors
make connections simple.
"+/2146#06"
#
#
Easy Push-Button Selection
lets you
If an icon appears at the end of a paragraph, go
to the box on that page with the corresponding
icon for pertinent information.
quickly set the input source for each TV or
VCR.
— Warning
— Important
#
Permanent Memory of Learned Codes —
retains learned codes, even if the AC power
fails.
Rý
. — Caution
° — Hint
± — Note
LEARN — See
“Usingthe Learning
Function” on
Page 3.
Input Select Buttons
1–4 — Makes source
selection easy.
WARNING:
S-Video Jack
transmits the best picture
To reduce the risk the of fire or shock hazard, do not expose this product to rain or moisture.
The lightning symbol is intended to alert
for your video.
.
.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
you to the presence of uninsulated danger-
ous voltage within this product’s enclo-
sure that might be of sufficient magnitude
!
to constitute
a
risk of electric shock. Do
not open the product’s case.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
The exclamation symbol is intended to in-
form you that important operating and
maintenance instructions are included in
the literature accompanying this product.
!
24'2#4#6+10
If the device has an S-Video cable,
connect it to the INPUT S-VIDEO (1-4) jack
for that device.
2.#%+0)"6*'"5'.'%614
"+/2146#06"
#
#
You can place the selector on almost any flat
surface. For the best results, do not place it
If you place the selector on the top of your TV,
electromagnetic interference from the TV might
distort the sound from any devices connected to
the selector. If this happens, move the selector
away from the TV.
on top of a TV or other electrical appliance.
#
Do not connect the device’s video output
to both INPUT V (1-4) and INPUT S-VIDEO
(1-4) jacks.
%100'%6+0)"&'8+%'5
Use stereo audio/video cables with phono
plugs (available at your local RadioShack
store and online at RadioShack.com) to
make all connections. For the best
3. If your TV or monitor does not have an
S-Video cable, connect its video input to
the selector’s OUTPUT V (1 or 2) jack.
performance, use high-quality audio/video
cables. Do not use audio cables for video.
The selector’s color-coded jacks make it easy
to connect devices to the selector. Yellow
jacks are for video, red jacks are for right
audio, and white jacks are for left audio.
If the TV or monitor has an S-Video
cable, connect it to the OUTPUT S-VIDEO
(1 or 2) jack.
."%#76+10".
You must use a Class 2 power source that
Do not connect the TV or monitor’s video
input to both OUTPUT V (1-2) and
OUTPUT S- VIDEO (1-2) jacks.
R
supplies 9V DC and delivers 500 mA. Its center
1. Connect the sound outputs for each
device to a set of INPUT R/L (1-4) jacks
on the back of the selector.
tip must be set to negative and its plug must fit
the selector’s DC 9V jack. The supplied adapter
meets these specifications. Using an adapter
that does not meet these specifications could
damage the selector or the adapter.
4. Connect the TV or monitor inputs to the
OUTPUT R/L (1-2) jacks.
2. If a device does not have an S-Video
cable, connect its video output to the
selector’s INPUT V (1-4) jack for that
device.
5. Connect the supplied AC adapter’s
barrel plug to DC 9V, then connect the
adapter’s AC plug to a standard AC
outlet..
•
Always connect the AC adapter to the
selector before you connect it to AC power.
•
When you finish, disconnect the adapter from
AC power before you disconnect it from the
selector.
© 2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
12'4#6+10
If you are using a universal remote,
press the remote’s key for the desired
device, the press the remote’s power
key.
/#07#..;"12'4#6+0)"6*'"
5'.'%614
1. Turn on the device you want to view.
2. Press POWER on the selector.
The selector learns the device’s signal,
then the button indicator turns off.
3. To view material from the device
connected to the INPUT 1 jack, press 1.
For INPUT 2, press 2, for INPUT 3, press
3, and for INPUT 4, press 4.
5. Repeat steps 3 and 4 to learn additional
remote control signals.
6. Press LEARN again. The LEARN
4. Turn on the desired input device, and
indicator turns off.
°"*+06"°"
operate the device as you usually do.°
Place a small white adhesive label (not supplied)
below the buttons on the front of the selector to
note which devices are connected to which set
of jacks (INPUT 1, INPUT 2, INPUT 3, INPUT 4).
75+0)"6*'"4'/16'"%10641."
61"12'4#6'"6*'"5'.'%614
1. Turn on the desired output devices (TV,
VCR, etc.).
75+0)"6*'".'#40+0)"(70%6+10
The selector is designed to learn signals from
a universal remote, or up to four different
audio/video devices’ remote controls. It can
connect a range of devices, including a DVD,
laser disc, another VCR, camcorder, or video
game player. The selector uses the latest
integrated circuit recording technology, so
the learned information is protected if AC
power fails.
2. Press POWER on the selector.
3. To view material from the device
connected to the INPUT 1 jack, point that
device’s remote control at the selector,
then press the power key on the remote
control to turn on the device.
1. Press POWER. The POWER indicator
lights.
If you are using a universal remote,
press the remote’s key for the desired
device, the press the remote’s power
key.
2. Hold down LEARN for about four
seconds then release. The LEARN
indicator flashes.
±
±"016'5"±"
If you do not complete each step within 10
seconds, the selector returns to the normal
function and you must start again at Step 1.
4. Repeat step 3 to turn on other devices
connected to the INPUT 2, INPUT 3, or
INPUT 4.
•
3. Press the button (1, 2, 3, or 4) on the
selector’s front panel to learn the
corresponding device’s signal. The
indicator lights.
•
Be sure the selector’s learning setup does
not affect the setup of other existing
equipment.
5. Operate the devices as you usually do.
4. Point the device’s remote control at the
selector then press the control’s power
key to turn on the device.
6417$.'5*116+0)
We do not expect you to have any problems
with your selector, but if you do, these
suggestions might help.
While learning commands from a standard or
universal remote control, the selector does
not respond or its indicator lights.
The selector does not work or works poorly.
• Be sure the learning process is correct.
• Try remote control’s other keys.
• Try another remote control.
• Be sure the AC adapter is properly and
securely connected.
• Be sure POWER is turned on. If the
power is turned on but the selector still
does not work, return it to the store for
repair.
• Try using a number key on the remote
control (for example, 0) instead of the
power key.
%#4'
Keep the selector dry; if it gets wet, wipe it
dry immediately. Use and store the selector
only in normal temperature environments.
Handle the selector carefully; do not drop it.
Keep the selector away from dust and dirt,
and wipe it with a damp cloth occasionally to
keep it looking new.
3
5'48+%'"#0&"4'2#+4
If your selector is not performing as it should, take it to your local RadioShack store for
assistance. Modifying or tampering with the selector’s internal devices can cause a malfunction
and might invalidate its warranty.
52'%+(+%#6+105
Power Source...........................................................................................................................DC 9V, 500mA
Power Consumption ...................................................................................................................................8W
Remote Control Average Range ..................................................................................................20 ft (6.1 m)
Dimension (HWD)..........................................................2 1/16 × 8 31/32 × 5 31/32 Inches (52 × 228 × 152 mm)
Weight ..................................................................................................................................... 35.1 oz (995 g)
Limited Ninety-Day Warranty
Specifications are typical; individual units may vary. Specifications are subject to change and improvement
without notice.
This product is warranted by RadioShack against
manufacturing defects in material and workmanship
under normal use for ninety (90) days from the date of
purchase from RadioShack company-owned stores
and authorized RadioShack franchisees and dealers.
EXCEPT AS PROVIDED HEREIN, RadioShack
MAKES NO EXPRESS WARRANTIES AND ANY IM-
PLIED WARRANTIES, INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTIC-
ULAR PURPOSE, ARE LIMITED IN DURATION TO
THE DURATION OF THE WRITTEN LIMITED WAR-
RANTIES CONTAINED HEREIN. EXCEPT AS PRO-
VIDED HEREIN, RadioShack SHALL HAVE NO
LIABILITY OR RESPONSIBILITY TO CUSTOMER
OR ANY OTHER PERSON OR ENTITY WITH RE-
SPECT TO ANY LIABILITY, LOSS OR DAMAGE
CAUSED DIRECTLY OR INDIRECTLY BY USE OR
PERFORMANCE OF THE PRODUCT OR ARISING
OUT OF ANY BREACH OF THIS WARRANTY, IN-
CLUDING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE, LOSS OF
TIME, DATA, PROPERTY, REVENUE, OR PROFIT
OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, EVEN IF RadioShack
HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Some states do not allow limitations on how long an
implied warranty lasts or the exclusion or limitation of
incidental or consequential damages, so the above
limitations or exclusions may not apply to you.
In the event of a product defect during the warranty
period, take the product and the RadioShack sales re-
ceipt as proof of purchase date to any RadioShack
store. RadioShack will, at its option, unless otherwise
provided by law: (a) correct the defect by product re-
pair without charge for parts and labor; (b) replace the
product with one of the same or similar design; or (c)
refund the purchase price. All replaced parts and
products, and products on which a refund is made, be-
come the property of RadioShack. New or recondi-
tioned parts and products may be used in the
performance of warranty service. Repaired or re-
placed parts and products are warranted for the re-
mainder of the original warranty period. You will be
charged for repair or replacement of the product made
after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure
caused by or attributable to acts of God, abuse, acci-
dent, misuse, improper or abnormal usage, failure to
follow instructions, improper installation or mainte-
nance, alteration, lightning or other incidence of ex-
cess voltage or current; (b) any repairs other than
those provided by a RadioShack Authorized Service
Facility; (c) consumables such as fuses or batteries;
(d) cosmetic damage; (e) transportation, shipping or
insurance costs; or (f) costs of product removal, instal-
lation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state.
RadioShack Customer Relations, 200 Taylor Street,
6th Floor, Fort Worth, TX 76102
12/99
15-1977
03A02
Printed in China
RadioShack Corporation
Fort Worth, Texas 76102
|