USB Flatbed Color Scanner
SYSTEM REQUIREMENTS
THE FCC WANTS YOU TO
KNOW
Before connecting the scanner, be sure your
computer is an IBM PC or compatible, run-
ning Windows 2000, Windows ME, or Win-
dows 98 or later, with a VGA or SVGA
monitor, and having all of the following:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful inter-
ference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
• CD-ROM drive
• one available USB port
• at least 32 MB RAM
• at least 160 MB free hard disk space (for
installing supplied software)
Note:
You cannot use the scanner with Mi-
However, there is no guarantee that interfer-
ence will not occur in a particular installation.
If this equipment does cause harmful inter-
ference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encour-
aged to try to correct the interference by one
or more of the following measures:
crosoft Windows 3.1 or Windows 95.
FCC DECLARATION OF
CONFORMITY
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept any interference received, in-
cluding interference that may cause undes-
ired operation.
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
Product:
USB Flatbed Color
Scanner
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Model:
25-3053
Responsible Party:
RadioShack
100 Throckmorton
Fort Worth, TX 76102
Consult your local RadioShack store or an
experienced radio/TV technician for help.
If you cannot eliminate the interference, the
FCC requires that you stop using your scan-
ner.
Phone:
817-415-3200
Changes or modifications not expressly ap-
proved by RadioShack may cause interfer-
ence and void the user’s authority to operate
the equipment.
You must use shielded interface cables with
this equipment.
3
Features
MONITOR REQUIREMENTS
SUPPLIED ACCESSORIES
To use the scanner with your computer’s
monitor, set the monitor to High Color (16-
bit) or True Color (24- or 32-bit). Then set
your monitor resolution to at least 800 × 600
DPI.
Make sure you have all of the following ac-
cessories before disposing of the packing
material.
• AC adapter (Input: 120V AC; Output:
12V DC, 15 W max.)
To set your monitor's colors and resolution,
open the Windows Control Panel, double-
• USB cable
• PageManager software CD
Display
Settings
.
click
, then click
4
Features
ˆ Important Safety Instructions
Read Instructions
operating instructions should be read
before the product is operated.
Power-Cord Protection
— Power-sup-
1.
2.
3.
— All the safety and
10.
ply cords should be routed so that they
are not likely to be walked on or pinched
by items placed upon or against them,
paying particular attention to cords at
plugs, convenience receptacles, and the
point where they exit from the product.
Retain Instructions
— The safety and
operating
instructions
should
be
retained for future reference.
Heed Warnings
— All warnings on the
Servicing
11.
12.
— Do not attempt to service
product and in the operating instructions
should be adhered to.
this product yourself as opening or
removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service
personnel.
Follow Instructions
and use instructions should be followed.
4.
5.
— All operating
Water and Moisture
— Do not use this
Damage Requiring Service
— Unplug
product near water (for example, near a
bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near
a swimming pool; and the like).
this product from the wall outlet and
refer servicing to qualified service per-
sonnel under the following conditions: a)
When the power-supply cord or plug is
damaged, b) If liquid has been spilled, or
objects have fallen into the product, c) If
the product has been exposed to rain or
water, d) If the product does not operate
normally by following the operating
instructions, e) If the product has been
dropped or damaged in any way, and f)
When the product exhibits a distinct
change in performance — this indicates
a need for service.
Carts and Stands
cart, stand, tripod, bracket, or table rec-
ommended by the manufacturer.
6.
7.
— Use only with a
Ventilation
— Slots and openings in the
cabinet are provided for ventilation and
to ensure reliable operation of the prod-
uct and to protect it from overheating,
and these openings must not be blocked
or covered. The openings should never
be blocked by placing the product on a
bed, sofa, rug, or other similar surface.
Overloading
13.
14.
— Do not overload wall
outlets, extension cords, or integral con-
venience receptacles as this can result
in a risk of fire or electric shock.
Heat
8.
9.
— The product should be situated
away from heat sources such as radia-
tors, heat registers, stoves, or other
products (including amplifiers) that pro-
duce heat.
Object and Liquid Entry
— Never push
objects of any kind into this product
through openings as they may touch
dangerous voltage points or short-out
parts that could result in a fire or electric
shock. Never spill liquid of any kind on
the product.
Power Sources
— The product should
be connected to a power source only of
the type described in the operating
instructions or as marked on the scan-
ner.
5
Important Safety Instructions
ˆ A Quick Look At Your Scanner
SCAN — Displays the
scanned object in
a
PageManager window.
COPY/PRINT
—
Prints the scanned
object to your
printer or copier.
CUSTOM — Lets
you assign a
function.
FAX — Displays
the scanned object
in fax application
software installed
on your computer.
STOP/CANCEL — Cancels
a scan in progress.
OCR — Converts
scanned text to a
Windows Notepad
file. You can then
import that text into
many word
E-MAIL — Displays the
scanned object in a new
e-mail message in your
e-mail application.
processing
programs.
/O — Turns the
scanner on or off.
Power Jack
Note: The ADF/TPA jack is not
used with this scanner.
USB
6
A Quick Look At Your Scanner
ˆ Preparation
Cautions:
We recommend you connect only one scan-
ner to your computer at a time. Connecting
two or more fast USB devices (such as CD-
ROMs, CD rewriters, scanners, printers or
hard disk drives) at the same time degrades
the performance.
You must use a Class 2 power
source that supplies 12V DC
and delivers at least 1250 mA.
!
Its center tip must be set to positive and
its plug must fit the scanner's power
jack. The supplied adapter meets these
specifications. Using an adapter that
does not meet these specifications
could damage the scanner or the
adapter.
LOCKING/UNLOCKING THE
SCANNER
• Always connect the AC adapter to the
scanner before you connect it to AC
power. When you finish, disconnect the
adapter from AC power before you dis-
connect it from the scanner.
Plug the AC adapter’s barrel plug into the
power jack on the back of the scanner, then
plug the other end of the AC adapter into a
standard AC outlet. The indicator on the front
of the scanner lights, indicating that the
scanner is turned on.
Note:
The scanning lamp under the scan-
ner's glass automatically remains lit so you
do not have to warm up the scanner each
time you want to scan. To conserve electrici-
ty and prolong the scanner's life, the lamp
automatically turns off after about 5 minutes.
Your scanner has a locking mechanism to
protect it during shipment or while you move
it.
Before you use the scanner, slide the lock on
Ž
the bottom of the scanner toward
(un-
INSTALLING SOFTWARE
AND HARDWARE
lock). To protect the scanner mechanism
when you move or ship it, slide the lock to-
ward • (lock).
To use your scanner, you must install the
supplied PageManager software onto your
computer then connect the scanner to the
computer.
CONNECTING AC POWER
The scanner uses the supplied 12V, 1250-
mA AC adapter for power.
The PageManager software includes instal-
lation files and a User's Guide. This guide
provides more detailed information about the
PageManager software's features. You can
read the guide while the CD is running, or
7
Preparation
print a copy directly from your hard drive to
Start
5. After you finish installing the software,
restart your computer.
your printer. To read the guide, click
Programs Presto! PageManager
,
,
,
then
Note:
Once the scanner is working, you
PageManager User’s Manual
.
can install the other applications pro-
vided with the CD.
You do not need to turn off the computer be-
fore connecting or disconnecting your scan-
ner.
VERIFYING CONNECTION
1. Turn on your computer and start the
installed Windows operating system
(Windows 2000, Windows ME, or Win-
dows 98 or later).
After you successfully install the scanner,
appears in the bottom right corner of the
Windows taskbar. The indicator on top of the
scanner turns orange when the scanner and
computer communicate.
2. Insert the PageManager software CD
into your CD-ROM drive. The CD starts
automatically.
If
appears instead, the scanner is not
properly connected. See “Troubleshooting”
on Page 14 for more information.
Note:
If the PageManager CD does not
start automatically, make sure the CD-
ROM's door is completely shut. If the CD
still does not start, the auto run option on
your computer might be turned off. If this
happens, click My Computer. The win-
dow shows the available drives on your
computer. Then double-click the icon for
your CD-ROM drive and double-click
Follow these steps to confirm that the scan-
ner has been successfully connected.
1. Right-click
on the Windows task-
bar. The shortcut menu appears.
Scan Buttons Setting
2. Click
. A dialog
box appears, confirming your scanner’s
settings.
setup.exe
. The CD starts.
Exit
3. Click
to close the dialog box. Your
3. Plug the flat end of the supplied USB
cable into your computer’s USB port.
scanner is ready to scan.
Notes:
• The supplied cable fits only one way.
If it does not insert easily, do not force
it.
• Refer to your computer’s owner’s
manual for the location of the USB
port.
• Some new computers also have a
keyboard with a built-in USB port. You
can plug the scanner’s cable into the
keyboard instead of the computer.
4. Plug the other end of the supplied USB
USB
cable into
ner.
on the back of the scan-
8
Preparation
ˆ Operation
You can operate the scanner directly by us-
ing the buttons on the front of the scanner, or
from your computer by using the supplied
PageManager software.
and imaging applications, with your scanner.
The software must meet Twain standards.
/O
1. Set
on the back of the scanner to to
turn on the scanner.
Note:
You must install the supplied
2. If the PageManager software is not cur-
PageManager software to use the scanner,
even if you do not use PageManager to con-
trol the scanner’s operation.
rently running, double-click
to start
it. The PageManager Desktop dialog
box appears. You can use this window
to select and work with scanned images.
The links at the bottom of the desktop let
you link images you scan to other soft-
ware installed on your computer.
USING THE SCANNER’S
BUTTONS
To scan a document using the buttons on the
front of the scanner, open the scanner's top
cover and place the document face down on
the glass. Then close the cover and press
Note:
If you need more information
about the PageManager Desktop dialog
Help
box, click
.
SCAN
.
Select
3. From the File menu, click
The scanner starts scanning the document
and window displays the scanning
progress. The PageManager Desktop dialog
box appears.
Source
appears.
. The Select Source dialog box
a
Note:
If you are using the scanner for the
first time or if it has not warmed up yet, the
scanner automatically warms itself up for
about 45 seconds before scanning.
When the scan is complete, the scanned im-
age is transmitted to the preset destination or
a destination you select (see “Using the Sup-
plied PageManager Software”).
USB Scanner
Select
. The PageManager
4. If necessary, click on
.
Then click
Desktop dialog box appears.
USING THE SUPPLIED
PAGEMANAGER
SOFTWARE
–
Note:
You only need to follow Steps 1 3
once unless you change the source to
another Twain device, such as a digital
camera.
You can use the supplied PageManager soft-
ware to control your scanner. This is useful
when you are using PageManager to file and
save your scanned objects.
5. Open the scanner’s document cover
and place the object to scan face down
on the glass. Then close the cover.
Note:
You can also install and use other
scanning software, including many graphics
9
Operation
Acquire
6. From the File menu, click
. The
forms, and other text objects. It pro-
vides the fastest scan time and small-
est file size. This setting defaults to
grayscale, 200 DPI.
USB Scanner dialog box appears, let-
ting you preview the scanned image.
• Black and White Photo — This setting
is best for scanning of black-and-
white photographs. It defaults to gray-
scale, 100 DPI.
• Color Document — Faster — This
setting is best for scanning color
pages with many graphics, mixed
graphics and text, line art, and photo-
graphs requiring a quick scan. It cre-
ates a quality scanned color object in
a file that is not too large. This setting
defaults to color, 100 DPI.
Scan
7. Make any adjustments, then click
to scan the final image.
• Color Document — Better Quality —
This setting provides the ideal setting
for color objects, object editing, desk-
top publishing, and high-quality out-
put. It produces a color scan with
slower scan time and larger file size.
This setting defaults to color, 200
DPI.
8. Adjust the desired scanner settings as
follows.
Scan Page For
— These options are
optimized for the various uses of
scanned images, such as scanning for
editing text or scanning in color. Select-
ing the proper scan setting before final
scanning provides the best results. The
scan setting determines the sharpness
of the object and the number of possible
shades of gray or color. Scan settings
also affect the speed of the scan and the
file size. You can select one of the fol-
lowing preset scan settings:
• Custom — This setting lets you use
the Scan Configuration dialog box
(described below) to define how you
want it to scan an object.
If you do not want to use one of these
preset options, you can manually select
the scan configuration options as shown
below. Note that when you select a pre-
set option, scan configuration settings
are for that preset option.
• Editing Text (OCR) — This setting is
best for scanning of letters, contracts,
memos, and other documents you
want to edit. It enhances the use of
OCR software for converting object
text to editable text, and provides
higher quality and larger file size than
the Faxing, Filing, or Copying scan
setting. This setting defaults to black
and white, 300 DPI.
Scan Configuration
— Use this section
of the USB Scanner dialog box to manu-
ally select scan options for the image.
• Faxing, Filing, or Copying — This set-
ting is best for scanning of newspaper
and magazine articles, receipts,
10
Operation
For example, if you put a photo in the
middle of the glass, the scanner will
automatically determine the size of
the photo. When AutoCrop is
selected, the scanner makes two
passes. The first pass senses the
object's size and the second scans
the image.
Note:
This option overrides any
selections you make using Size.
Adv. Settings
•
— Select this option to
see advanced settings for scanning.
Adv. Settings
Mode
and choose
•
•
— Click the drop-down arrow
True Color Grayscale
,
,
When you click on
, the
Black-and-White
or
.
Advanced Settings dialog box
appears.
Res
— This is the resolution setting
for the scan in dots-per-inch (DPI).
The higher the DPI, the sharper the
image. However, higher DPI settings
also produce larger files. Usually the
higher resolution settings are used for
precision work such as photographs
or fine artwork. Click the drop-down
arrow and choose a resolution setting
from the list.
Note:
We recommend you use the
higher-resolution settings with the
supplied PageManager software.
Size
•
— The page size for the image.
If you want to use one of those preset
sizes, click the drop-down arrow and
choose the size from the list. To cre-
ate a custom size, click on the picture
window and drag the mouse. A dotted
box on the window indicates the page
size, and the two number boxes (with
the horizontal and vertical symbols
next to them) show the actual page
size in inches. You can also enter the
horizontal and vertical sizes in the
number boxes.
Default Setting
the scanning software to its default
— This option sets
Default Setting
values.
works fine
for most scanning.
Customize Setting
— This option
lets you set the Brightness, Con-
trast, and Gamma correction for the
scanned image.
(Brightness)
•
— Drag the
slider to the left or right to adjust
the brightness of the scanned
image.
AutoCrop
the scanner automatically determine
the size of the object being scanned.
•
— Select this option to let
11
Operation
(Contrast)
to the left or right to adjust the
contrast of the scanned image.
Note:
For more details about the Scan Man-
ager's features, choose Scan Manager Help
from the Help menu.
•
•
— Drag the slider
(Gamma)
Preview
9. Click . The scanner scans the
— Gamma correc-
tion allows you to achieve pre-
cise color matching. Because the
computer cannot always transmit
the exact color information to the
hardware, you might have to
make some color adjustments
using the Gamma setting.
object and displays a preview using the
options you selected.
10. Review the image to make sure it is
what you want. Readjust the settings if
necessary.
11. To see a preview again before scanning
Preview
the final image, click
.
Auto Color Balance
Click on
to
use the default Gamma setting.
This setting works in most cases
and normally does not need
adjustment. Otherwise, click on
12. When you are satisfied with the image
Scan
settings, click
.
The scanner scans the object, and
a
Manual
, then drag the slider to
progress bar appears showing the percent-
age completed.
the left or right to improve the
appearance of colors in
scanned image on your monitor.
a
When the scan is complete, the scanned im-
age appears in the destination software.
Descreen
— Select this option
See the PageManager User's Manual and
Working with PageManager for more infor-
mation about using the PageManager soft-
ware.
when scanning a picture from a
newspaper or magazine article, or
another object that contains images
with patterns or dots. Scans of pat-
terns or dots sometimes have a dis-
torted or wavy appearance. The
scanner scans the object to com-
pensate for the patterns and dots,
and produces a clearer image. The
scanning might slow down a bit
when this option is selected. Do not
select this option when scanning
photographs.
CONFIGURING THE
SCANNER
This table shows the default settings for each
of the scanner’s buttons.
Default
Scan Setting
Resolution
(DPI)
Button
STOP/CANCEL None
None
48-Bits Output
—
Select this
option when using application soft-
ware that can work with 48-bit
objects (such as Adobe Photoshop
and PageManager). Not all applica-
tions can work with 48-bit objects. If
you are not sure if your application
can work with 48-bit objects, check
your application’s documentation.
CUSTOM
E-MAIL
User-defined
User-defined
75
Black and
white
OCR
Black and
white
150
150
150
FAX
Black and
white
COPY/PRINT
Black and
white
12
Operation
3. Adjust the scan and page settings for
the buttons as follows.
Default
Scan Setting
Resolution
(DPI)
Button
SCAN
81/2 × 11 inch 75
gray photo
Scan Mode
— Select Black/White to
scan in black and white. For example,
letters and memos are usually scanned
in black and white. Select Grayscale to
scan objects containing drawings or
black-and-white photographs. The scan-
ning produces an image in varying
shades of gray. Select Color to scan
color photographs and other color
objects.
Note:
If a button is not pre-configured (for
example, if your computer does not have fax
FAX
software installed so
cannot be pre-
configured), a dialog box appears to remind
you to configure that button manually. Follow
the steps in “Changing a Scanner Button’s
Settings” to configure the button.
Scan Size
You can change the setting of any of the
scanner’s buttons using the Scan Buttons
Setting dialog box. This dialog box displays a
list of options and settings for customizing
the scanner.
— Choose one of the page
sizes from the drop-down list. The out-
lines on the picture represent the vari-
ous page sizes. Clicking on one of those
outlines also selects it as the page size
for the scan. If you select the Custom
option from the drop-down list, boxes
appear in place of the picture. Enter the
width and height dimensions for your
scan in those boxes.
1. Click
click on
on the windows taskbar and
Scanner Buttons Setting
. The
Scan Buttons Setting dialog box
appears.
Resolution
— Choose from the drop-
down list to adjust the dots per inch
(DPI) of the resolution. The maximum
resolution is 4800 DPI, the minimum is
50 DPI. The higher the DPI setting, the
sharper and clearer the scanned image.
However, higher DPI settings take
longer to scan and produce larger files
for the scanned images.
Brightness, Contrast and Threshold
— Drag the sliders to the left or right to
adjust the brightness, contrast, and
threshold (the intensity point at which a
scanned object is determined by the
software to be dark or light).
2. Right-click on the icon for the desired
scanner button to view the current set-
ting.
OK
. The new configuration and its
4. Click
adjusted settings are applied to the but-
ton.
13
Operation
ˆ Troubleshooting
If your scanner is not working as it should, these suggestions might help you eliminate the
problem. If the scanner still does not operate properly, take it to your local RadioShack store for
assistance.
Problem
Possible Cause
Remedy
appears in the Windows The scanner’s cable is not securely Make sure the scanner’s cable is
taskbar.
connected, or was disconnected,
then reconnected.
securely connected. Then right-
click on the Windows taskbar
and select Search Scanner.
The AC adapter is not connected or Make sure the AC adapter is
is connected incorrectly.
securely connected.
The computer was not restarted
after installing the PageManager
software.
Restart your computer.
Note: Readme.txt in the
PageManager directory included
with the supplied software provides
additional information that might
help you diagnose problems con-
necting the scanner.
The scanner might be locked.
Unlock the scanner (see “Locking/
Unlocking the Scanner” on
Page 7).
The power indicator does not The AC adapter is not connected or Make sure the AC adapter is
light.
is connected incorrectly.
securely connected.
CARE
Keep the scanner dry; if it gets wet, wipe it
dry immediately. Use and store the scanner
only in normal temperature environments.
Handle the scanner carefully; do not drop it.
Keep the scanner away from dust and dirt,
and wipe it with a damp cloth occasionally to
keep it looking new.
Modifying or tampering with the scanner’s in-
ternal components can cause a malfunction
and might invalidate its warranty. If your
scanner is not performing as it should, take it
to your local RadioShack store for assis-
tance.
14
Troubleshooting
ˆ Specifications
Bit Depth ............................................................................................................. 48-Bit Color (24-bit output)
16-Bit Grayscale ...................................................................................................................... 1-Bit Line Art
Scanning Resolution .......................................................................... Optical Resolution: 1200 × 4800 DPI
Maximum Resolution (interpolated) ................................................................................... 4800 × 4800 DPI
Maximum Scanning Size ................................................................................................. 8.5 × 11.60 Inches
(21.6 × 29.7 cm)
(A4 letter)
Operating Systems .................................................................................................. Windows 98, 2000, ME
Operating Temperature (without condensation) ........................................................................ 41° to 104°F
(5° to 40°C)
Relative Humidity ........................................................... 20% to 80% at 95°F (35°C) without condensation
Input Voltage ...................................................................................................................... 120V AC, 60 Hz
Output Voltage ........................................................................................................... 12V DC, 15 Watt Max.
Safety and Agency Certifications ................................................ UL, GS, FCC Class B, VCCI Class 2, CE
Dimensions (HWD) .............................................................................................. 31/2 × 161/2 × 101/4 Inches
(9.9 × 42.4 × 29.9 cm)
Weight ................................................................................................................................................. 6.4 lb
(2.9 kg)
Accessories ...................................................................................... USB Cable, AC Adapter, Software CD
Specifications are typical; individual units might vary. Specifications are subject to change and improve-
ment without notice.
15
Specifications
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal
use for ninety (90) days from the date of purchase from RadioShack company- owned stores and authorized
RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS
WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED
WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABIL-
ITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LI-
ABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE
PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO,
ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR
PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as
proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law:
(a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the
same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a
refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the
performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the
original warranty period. You will be charged for repair or replacement of the product made after the expiration of the
warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, mis-
use, improper or abnormal usage, crash, collision, impact, violent contact, failure to follow instructions, improper in-
stallation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other
than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d)
cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up
service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
12/99
We Service What We Sell
25-3053
08A01
Printed in China
RadioShack Corporation
Fort Worth, Texas 76102
|