QSC Audio Whiteboard Accessories DDI 11 User Guide

DDI-11  
DataPort Accessory Card  
I N S TA L L AT I O N G U I D E  
*TD-000181-00*  
DDI-11  
*TD-000181-00*  
Preliminary  
 
III. INSTALLATION  
The DDI-11 kit (QSC part # SG-000515-00) includes these items:  
DDI-11 board  
Two #4-40 × ¼” black screws  
Installation guide  
Use this procedure to install the DDI-11:  
1. Turn off the amplifier.  
2. Plug the card into the amplifier’s DataPort. Use the two screws on each side of the DataPort to secure it; do not overtighten them.  
3. To attach wires to the DDI-11 terminal strip, strip about 5 mm (0.2”) of insulation from the wire. Twist the exposed wire strands together  
and make sure there are no stray ones. Turn the screw on the terminal counterclockwise until you can fully insert the wire end into the  
terminal. Turn the screw clockwise until the terminal clamps the wire securely. Repeat for all the wires needed. The terminal can accept  
stranded wire up to 17 AWG (1 mm2) or solid wire up to 16 AWG (1.5 mm2) in size.  
4. The amplifier is ready for use.  
IV. WARRANTY AND DISCLAIMERS  
QSC Audio Products, Inc. is not liable for any damage to speakers, amplifiers, or any other  
equipment that is caused by negligence or improper installation and/or use of the DDI-11  
DataPort Accessory Card.  
PRODUCT RETURN GUIDELINES  
1. Pack the product securely for protection during shipment. QSC will provide factory  
packaging free of charge, on request.  
2. Include a photocopy of the sales receipt, along with your name, return address, phone  
PRODUCT WARRANTY  
QSC Audio Products, Inc. ("QSC") guarantees its products to be free from defective material and  
number, and a description of the problem.  
3. Call QSC Technical Services department for an RMA number.  
4. Write the RMA number on the outside of the shipping package.  
/ or workmanship for a period of three (3) years from date of sale, and will replace defective  
parts and repair malfunctioning products under this warranty when the defect occurs under  
normal installation and use - provided the unit is returned to our factory or one of our authorized  
service stations via pre-paid transportation with a copy of proof of purchase (i.e., sales receipt).  
This warranty provides that the examination of the return product must indicate, in our  
judgment, a manufacturing defect. This warranty does not extend to any product which has been  
subjected to misuse, neglect, accident, improper installation, or where the date code has been  
removed or defaced. QSC shall not be liable for incidental and/or consequential damages. This  
warranty gives you specific legal rights. This limited warranty is freely transferable during the  
term of the warranty period.  
5. Ship the product prepaid to QSC Audio Products. We recommend United Parcel Service  
(UPS).  
QSC Technical Services  
1665 MacArthur Blvd.  
Costa Mesa, CA 92626 USA  
Telephone:  
(800) QSC AUDIO [(800) 772-2834] USA only  
+1 (714) 957-7150  
The customer may have additional rights, which vary from state to state.  
+1 (714) 754-6175  
In the event that this product was manufactured for export and sale outside of the United States  
or its territories, then this limited warranty shall not apply. Removal of the serial number on this  
product, or purchase of this product from an unauthorized dealer, will void this limited warranty.  
Fax:  
+1 (714) 754-6173  
E-mail:  
Web:  
Contact us at 800-772-2834 (USA only) or +1 (714) 957-7150, or visit our Web site at  
QUALIFIED SERVICE CENTERS  
TECHNICAL ASSISTANCE  
QSC maintains a service center network for your convenience. If you choose to return your  
product to a local service center and need a referral, contact QSC Technical Services  
department. Accessories, input modules, and other peripheral QSC products must be returned  
to the factory for service.  
If you suspect that your DDI-11 card is defective, check your system configuration and  
onnections to determine the origin of the problem. In many cases, incorrect audio interfacing,  
poor cabling, or other system level impairments are the causes of problems in audio systems.  
For technical assistance beyond the information given in this manual, contact the QSC Technical  
Services department.  
INTERNATIONAL SERVICING  
For QSC products purchased outside the United States, refer service to the distributor or dealer  
from which the product was purchased. There are numerous service centers in many countries.  
Your dealer, distributor, or QSC Technical Services can refer you to a service center in your  
country.  
FACTORY SERVICE  
If your DDI-11 card ever requires factory service, contact the QSC Technical Services  
department for return instructions and a Return Material Authorization (RMA) number. QSC is  
not responsible for products returned without an RMA number.  
3
 
QSC Audio Products, Inc., 1675 MacArthur Boulevard Costa Mesa, California 92626 USA PH: (714) 754-6175 FAX: (714) 754-6174  
QSControl is a trademark of QSC Audio Products, Inc. “QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office.  
4
 

Radio Shack Mouse 26 442 User Guide
RCA CRT Television F19627 User Guide
RCA DVD Player DRC300iH User Guide
RIDGID Water Pump TP 4000 User Guide
Rival Can Opener CN762 User Guide
RocketFish Computer Drive RF HD25 User Guide
Roland Drums V Tour TD 6KW User Guide
Rotel Stereo Amplifier RSP 985 User Guide
Samsung CRT Television TXJ1366 User Guide
Samsung Security Camera SCC B5300GP User Guide